Snap 1000

rbur · 10-29-2008, 07:41 PM

I have a newly acquired Snap 1000 with 40gb drive. Using assist, I have assigned it an ip address. I can see the unit on my network and can read - write ok. In other words ... it works fine. BUT... the system led flashes on/off at a constant rate of about 1/sec. Is this normal ? Is there a guide that explains the light patterns ?

blue68f100 · 10-30-2008, 12:33 PM

That is a normal (hearbeat). The wiki has some more info on these. And you may get a owners/user manual from Overland. The now owners of the Snap line.

rbur · 10-31-2008, 11:27 AM

Thank you for the reply.

10-29-2008, 07:41 PM	#1
rbur Cooling Neophyte Join Date: Oct 2008 Location: Canada Posts: 2	Snap 1000 I have a newly acquired Snap 1000 with 40gb drive. Using assist, I have assigned it an ip address. I can see the unit on my network and can read - write ok. In other words ... it works fine. BUT... the system led flashes on/off at a constant rate of about 1/sec. Is this normal ? Is there a guide that explains the light patterns ?

10-30-2008, 12:33 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1000 That is a normal (hearbeat). The wiki has some more info on these. And you may get a owners/user manual from Overland. The now owners of the Snap line. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

10-31-2008, 11:27 AM	#3
rbur Cooling Neophyte Join Date: Oct 2008 Location: Canada Posts: 2	Re: Snap 1000 Thank you for the reply.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)