Peltier & temps

CmoS · 05-23-2004, 05:14 AM

Hello there!!

I have an amd cpu with 110watts...(2450-1,84v)

Alone with water cooling has 30C.If I put a peltier of 170W how much i fell in temperature??

THANKS!!

killernoodle · 05-23-2004, 08:05 AM

depends on how cool you can get the hot side and the thickness of the cold plate.
Probably not that much cooler. You really need 200+ watts of peltier to cool over 100 watts of CPU. Like I said though, it all depends on how cool you can get the hot side and the thickness of the cold plate.

Butcher · 05-23-2004, 08:16 PM

At best you might drop it down below ambient. At worst it'll be worse than straight water. It depends on your cooling system.

CmoS · 05-24-2004, 03:54 AM

thanks for your answers!I will look to put it to the vga!((dont tell me and there it will be worse...

05-23-2004, 05:14 AM	#1
CmoS Cooling Neophyte Join Date: May 2004 Location: Greece Posts: 2	Peltier & temps Hello there!! I have an amd cpu with 110watts...(2450-1,84v) Alone with water cooling has 30C.If I put a peltier of 170W how much i fell in temperature?? THANKS!!

05-23-2004, 08:05 AM	#2
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	depends on how cool you can get the hot side and the thickness of the cold plate. Probably not that much cooler. You really need 200+ watts of peltier to cool over 100 watts of CPU. Like I said though, it all depends on how cool you can get the hot side and the thickness of the cold plate. __________________ I have a nice computer.

05-23-2004, 08:16 PM	#3
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	At best you might drop it down below ambient. At worst it'll be worse than straight water. It depends on your cooling system. __________________ Once upon a time, in a land far far away...

05-24-2004, 03:54 AM	#4
CmoS Cooling Neophyte Join Date: May 2004 Location: Greece Posts: 2	thanks for your answers!I will look to put it to the vga!((dont tell me and there it will be worse...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)