UNDER?!-Cpu Cooling 0.o (p4)

tuxp3 · 02-10-2004, 08:05 PM

alright i have this Pentium 4 that i am desperately trying to get working.. still waiting for a part and with my boredom i have done this with a small IC heatsink i found in a linksys router that was trashed...
so i get my hack saw out and go at it with no real purpose...
and heres what i got with a quick sanding/lapping (cant see it)
PIC 1
fits nice doesnt it?
this is the underside of the P4 (socket 423)
PIC 2
-----------------
thats all well and good but what about things on the mother board....
far away.... Pic 3
Close-up Pic4
Blue boxes are 1/8" red are 1/16" or so and the ziff socket is about 3/16" tall. also a bunch of small transistors and stuff.
SORRY about Blur pics the digicam i have is very cheap
-----------------------------------------
Ideas on how to make the small heat sink fit?
the CPU in the ziff socket is about 1/16" higher then normal, so it cant work.

Now, what effect will this have on my Cpu's temp!? tests to come in a few days

Thanks, Tux

guandi · 02-15-2004, 08:02 AM

not very much.. if you have a heatsink *under* the cpu... how are you going to get cold air in there to move the hot air away? imho your wasting your time, but its a nice thought anyway. maybe you should put your eforts into making a waterblock that fits in there, against the mobo and cpu hotspots, i reckon it would be easier trying to find a way to get a small pipe under the zif that getting air in there.

SlaterSpeed · 02-16-2004, 12:04 PM

What about if you just filled gap up so the heat could transfer across the gap to the mobo easyer and then the mobo would act like a hsink. You would be surprised how much heat the mobo could dissipate. (feel the back of you nb chip its hot isnt it

)

feathers · 03-14-2004, 08:37 AM

What about if you stopped pondering over nonsense and installed a peltier cooling system? Your CPU temp would be zero celsius or below and that chillyness would extend to the CPU socket as well!

Jag · 05-18-2004, 09:05 AM

Quote:

Originally Posted by feathers

What about if you stopped pondering over nonsense and installed a peltier cooling system? Your CPU temp would be zero celsius or below and that chillyness would extend to the CPU socket as well!

Feathers, you talking air cooled peltier or watercooled?

Colt357tw · 07-21-2004, 10:45 PM

fill thermal grease inside CPU socket wont do jack.

However, blowing air to the back of socket....

02-15-2004, 08:02 AM	#2
guandi Cooling Savant Join Date: Dec 2003 Location: UK Posts: 174	not very much.. if you have a heatsink under the cpu... how are you going to get cold air in there to move the hot air away? imho your wasting your time, but its a nice thought anyway. maybe you should put your eforts into making a waterblock that fits in there, against the mobo and cpu hotspots, i reckon it would be easier trying to find a way to get a small pipe under the zif that getting air in there. __________________ A8N-SLI Deluxe FX55@3ghz 2x TwinX1024-3200XL 2x BFG6800Ultra Audigy2 ZS + Gigaworks S750 2x120gb/4x80gb lots of water/copper/pumpy goodness.

02-16-2004, 12:04 PM	#3
SlaterSpeed Cooling Savant Join Date: Nov 2003 Location: Suffolk, UK Posts: 234	What about if you just filled gap up so the heat could transfer across the gap to the mobo easyer and then the mobo would act like a hsink. You would be surprised how much heat the mobo could dissipate. (feel the back of you nb chip its hot isnt it )

03-14-2004, 08:37 AM	#4
feathers Cooling Neophyte Join Date: Mar 2004 Location: UK Posts: 81	What about if you stopped pondering over nonsense and installed a peltier cooling system? Your CPU temp would be zero celsius or below and that chillyness would extend to the CPU socket as well!

07-21-2004, 10:45 PM	#6
Colt357tw Cooling Neophyte Join Date: Jun 2004 Location: Taiwan Posts: 55	fill thermal grease inside CPU socket wont do jack. However, blowing air to the back of socket....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)