W/C Parts for Sale

2Busy · 05-11-2005, 04:58 AM

W/C Parts for Sale Too much stuff, these need to go! All items Sold!

Swiftech 6002 used approximately 6 months $30 plus actual shipping

Mag3, has never leaked, sealed with light application of silicone before being
put in service. Power cord has been cut off to work with relay. $20 plus actual shipping.

Relay kit. Has relay mounted on pcb with a n/o and n/c contact arrangement. About 1 inch square. Will include with it a spdt swich to be able to switch between running with or without ps turned on, it has a 12V DC coil. Will also include an ac power inlet like on the back of your ps, as well as an ac receptacle, panel mount style. I had this hooked up where my psu plugged into the ac recptacle. This way I had 1 less ac line running to my power strip. It also has a molex connector to accept the 12V DC signal for the coil to operate.

Brand new never mounted Cycone Fusion SL gpu block and mounting hardware. $35 plus actual shipping. SOLD!

Brand new never mounted 77 Bonneville core. Has just had to tubes cut down to accept 1/2 ID hose, no 3rd party barbs added. Has never been tested. $15 plus actual shipping. It has a shroud already made for it that will be inlcuded. SOLD

Will consider all offers or trades.

I have Heatware as well as 100% Ebay rating. Any questions just give me a shout. I prefer Paypal Non CC, but will accept just about anything short of foreign currency. Check, money order, etc. Personal checks wait 7 days to clear before shipment.

bitbum · 05-11-2005, 07:19 PM

I think I would be interested in your heater core. Could you tell me the dimensions?

2Busy · 05-11-2005, 09:42 PM

Quote:

Originally Posted by bitbum

I think I would be interested in your heater core. Could you tell me the dimensions?

Core by itself is 12 long x 5-5/8 wide x 2 thick in inches

with shroud it is 3-3/8 thick.

bitbum · 05-11-2005, 11:31 PM

Quote:

Originally Posted by 2Busy

Core by itself is 12 long x 5-5/8 wide x 2 thick in inches

with shroud it is 3-3/8 thick.

OK, I'll take it. Can you PM me to work out the details?

kaotic504 · 05-12-2005, 08:02 PM

do you have an A64 mounting bracket for that swiftech and what size tubing does the SilverProp SL take?

2Busy · 05-12-2005, 08:22 PM

Quote:

Originally Posted by kaotic504

do you have an A64 mounting bracket for that swiftech and what size tubing does the SilverProp SL take?

The bracket I have is for the Athlon chip, and the SilverProp is 1/2 od on the barb, so it would be for 1/2 id tube.

whitebloodcell · 06-03-2005, 02:27 PM

ygpm regarding the 6002 block

HiJon89 · 06-04-2005, 10:14 PM

Price on the relay kit?

rcillig · 07-15-2005, 02:24 PM

pm regarding the 6002 block

05-11-2005, 04:58 AM	#1
2Busy Cooling Neophyte Join Date: Jul 2004 Location: Oklahoma Posts: 62	W/C Parts for Sale W/C Parts for Sale Too much stuff, these need to go! All items Sold! Swiftech 6002 used approximately 6 months $30 plus actual shipping Mag3, has never leaked, sealed with light application of silicone before being put in service. Power cord has been cut off to work with relay. $20 plus actual shipping. Relay kit. Has relay mounted on pcb with a n/o and n/c contact arrangement. About 1 inch square. Will include with it a spdt swich to be able to switch between running with or without ps turned on, it has a 12V DC coil. Will also include an ac power inlet like on the back of your ps, as well as an ac receptacle, panel mount style. I had this hooked up where my psu plugged into the ac recptacle. This way I had 1 less ac line running to my power strip. It also has a molex connector to accept the 12V DC signal for the coil to operate. Brand new never mounted Cycone Fusion SL gpu block and mounting hardware. $35 plus actual shipping. SOLD! Brand new never mounted 77 Bonneville core. Has just had to tubes cut down to accept 1/2 ID hose, no 3rd party barbs added. Has never been tested. $15 plus actual shipping. It has a shroud already made for it that will be inlcuded. SOLD Will consider all offers or trades. I have Heatware as well as 100% Ebay rating. Any questions just give me a shout. I prefer Paypal Non CC, but will accept just about anything short of foreign currency. Check, money order, etc. Personal checks wait 7 days to clear before shipment. __________________ CoolerMaster Cavalier \| MSI KT6V-LSR \| Barton 2800+ 333 fsb \| Enermax EG465P \| 2 x 256 Corsair XMS PC3200 CL2 \| Chaintech FX 5700 \| Asus 7133 TV/FM \| Maxtor Diamond Max 120 gb & 160 gb \| Optorite DVD Burner \| Audigy MP3 \| Thermalright SLK900A\| Last edited by 2Busy; 07-18-2005 at 10:11 PM. Reason: some item sold

06-04-2005, 10:14 PM	#8
HiJon89 Cooling Neophyte Join Date: May 2005 Location: New York Posts: 26	Price on the relay kit? __________________ WTB: PA120.2, D-Tek FuZion, PC-A16B, PVR-500 In Progress: P5B Deluxe 2GB Crucial 10th Anniversary X1950XTX Crossfire 7900GTX SLI Corsair HX620 3DMark05: 12308 3DMark03: 25820 3DMark2001: 35632

07-15-2005, 02:24 PM	#9
rcillig Cooling Neophyte Join Date: Jul 2005 Location: Omaha, Nebraska Posts: 3	pm regarding the 6002 block __________________ Windows XP Pro SP2 Thermaltake Xaser III Aluminum Case AMD Athlon 2600 Moblie IQYHA 0352 RPMW(217*12) 2.600 @1.80vcore ThermalrightSLK-947U / 92mm Panaflo DFI Lanparty NFII Ultra Rev. B (Hellfire 6-19-04 Rev2) Drivers 4.27 1gig Mushkin PC3200 2-2-2-11@3.3v Antec NEO Power 480 BFG 6800 Ultra OCed 466mhz / 1.18ghz SB Audigy 2 ZS 160 GiG Seagate SATA - 320gig WD SATA - 250gig Maxtor - 60gig Maxtor 17inch Samsung 712n LCD LG DVD Writer - LG DVD/CW Combo Heatware ID

05-11-2005, 07:19 PM	#2
bitbum Cooling Neophyte Join Date: May 2005 Location: California Posts: 3	I think I would be interested in your heater core. Could you tell me the dimensions?

05-12-2005, 08:02 PM	#5
kaotic504 Cooling Neophyte Join Date: Mar 2004 Location: New Orleans Posts: 86	do you have an A64 mounting bracket for that swiftech and what size tubing does the SilverProp SL take?

06-03-2005, 02:27 PM	#7
whitebloodcell Cooling Neophyte Join Date: Jun 2005 Location: Wells, England Posts: 1	ygpm regarding the 6002 block

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)