What temps do you get with your tec's?

Wayne Harrow · 05-29-2002, 12:13 PM

Im gettting my tec soon so im curious of what temps people are getting?

cheers

Miss_Man · 05-29-2002, 12:19 PM

What TEC are you getting?
For me, its 21C load temp, Athlon XP @ 2079 mhz, 2.18v, 34C water. Using two 172 watt peltiers side by side at 22V each. Measured by the onboard mobo probe.

Wayne Harrow · 05-29-2002, 02:16 PM

Im getting a 220w tec but im not expecting any good temps untill i add another rad.

imagex · 06-02-2002, 09:15 PM

Dude where are u getting a 220watt peltier from?? I want one!!

Wayne Harrow · 06-03-2002, 05:16 AM

I live in UK some im getting it from www.tekheads.co.uk but if your in US you can get them from www.Dangerden.com or www.cooltechnica.com.

bigben2k · 06-03-2002, 08:25 AM

Just out of curiosity, do you intend to pickup a heater core?

(Hello, UK!)

Wayne Harrow · 06-03-2002, 08:59 AM

Na im thinking of getting one of the OCPC Abyss Rads with my BIX aswell.

Anomaly2181 · 07-29-2002, 02:39 PM

Hey Miss_MAn what power supply are you using to power your 2 172's? Also a load of 22C seems high even for an athlon with 2 high power pelts.

Wayne Harrow · 07-29-2002, 02:55 PM

Not realy beacuse his water temp is 34 degrees and his processor is putting out alot of heat. Also the on board temp monitors are also quite abit high specially when going under ambient.

imagex · 07-29-2002, 03:30 PM

I've diecided to stick with my 172 watt pelt, it's keeping my 1.4g running @1.6, core volts maxed ,@ 71F. this way its cooler than a heatsink and fan but I have no chance of condension " that condension's a real pain in the ass!"

Wisked Klown · 08-29-2002, 12:25 AM

Miss_Man is putting off anywhere from 145.54watts of heat to 137.10watts of heat. The higher one is for a XP1600 and the lower is for a XP2200. After all he didn't say what XP he had.

ap0calyps · 12-23-2002, 01:27 PM

Quote:

Originally posted by Miss_Man
What TEC are you getting?
For me, its 21C load temp, Athlon XP @ 2079 mhz, 2.18v, 34C water. Using two 172 watt peltiers side by side at 22V each. Measured by the onboard mobo probe.

How are you cooling your water?

Miss_Man · 01-08-2003, 09:38 AM

I've quit PC-hobbying for some time now but if you're interested, here's how I was cooling the 2 x 172s, 1 x 65 and 1 x 80w pelts and the water.

I know you dont have room for that. If you're in for a detailed read about it, you can go here.
http://www.overclockers.com/tips1003/
http://www.overclockers.com/tips800/

jtroutma · 01-08-2003, 06:41 PM

So NOW what are you into Miss_Man?

05-29-2002, 12:13 PM	#1
Wayne Harrow Cooling Neophyte Join Date: May 2002 Location: UK, Dagenham Posts: 42	What temps do you get with your tec's? Im gettting my tec soon so im curious of what temps people are getting? cheers __________________ 226w Tec AthlonXP 1600+ @ 1950Mhz Abit KD7 Crucial 2100 DDR Radeon 8500

05-29-2002, 02:16 PM	#3
Wayne Harrow Cooling Neophyte Join Date: May 2002 Location: UK, Dagenham Posts: 42	Im getting a 220w tec but im not expecting any good temps untill i add another rad. __________________ 226w Tec AthlonXP 1600+ @ 1950Mhz Abit KD7 Crucial 2100 DDR Radeon 8500

06-02-2002, 09:15 PM	#4
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	Dude where are u getting a 220watt peltier from?? I want one!! __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

06-03-2002, 05:16 AM	#5
Wayne Harrow Cooling Neophyte Join Date: May 2002 Location: UK, Dagenham Posts: 42	I live in UK some im getting it from www.tekheads.co.uk but if your in US you can get them from www.Dangerden.com or www.cooltechnica.com. __________________ 226w Tec AthlonXP 1600+ @ 1950Mhz Abit KD7 Crucial 2100 DDR Radeon 8500

06-03-2002, 08:25 AM	#6
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Just out of curiosity, do you intend to pickup a heater core? (Hello, UK!) __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

05-29-2002, 12:19 PM	#2
Miss_Man Cooling Savant Join Date: Dec 2000 Posts: 151	What TEC are you getting? For me, its 21C load temp, Athlon XP @ 2079 mhz, 2.18v, 34C water. Using two 172 watt peltiers side by side at 22V each. Measured by the onboard mobo probe.

06-03-2002, 08:59 AM	#7
Wayne Harrow Cooling Neophyte Join Date: May 2002 Location: UK, Dagenham Posts: 42	Na im thinking of getting one of the OCPC Abyss Rads with my BIX aswell. __________________ 226w Tec AthlonXP 1600+ @ 1950Mhz Abit KD7 Crucial 2100 DDR Radeon 8500

07-29-2002, 02:39 PM	#8
Anomaly2181 Cooling Neophyte Join Date: Jul 2002 Location: Arlington, TX Posts: 67	Hey Miss_MAn what power supply are you using to power your 2 172's? Also a load of 22C seems high even for an athlon with 2 high power pelts. __________________ I want to die peacefully in my sleep like my grandfather.....not like my family kicking and screaming in his backseat.

07-29-2002, 02:55 PM	#9
Wayne Harrow Cooling Neophyte Join Date: May 2002 Location: UK, Dagenham Posts: 42	Not realy beacuse his water temp is 34 degrees and his processor is putting out alot of heat. Also the on board temp monitors are also quite abit high specially when going under ambient. __________________ 226w Tec AthlonXP 1600+ @ 1950Mhz Abit KD7 Crucial 2100 DDR Radeon 8500

07-29-2002, 03:30 PM	#10
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	I've diecided to stick with my 172 watt pelt, it's keeping my 1.4g running @1.6, core volts maxed ,@ 71F. this way its cooler than a heatsink and fan but I have no chance of condension " that condension's a real pain in the ass!" __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

08-29-2002, 12:25 AM	#11
Wisked Klown Cooling Neophyte Join Date: Jul 2002 Location: Sheboygan, Wisconsin Posts: 19	Miss_Man is putting off anywhere from 145.54watts of heat to 137.10watts of heat. The higher one is for a XP1600 and the lower is for a XP2200. After all he didn't say what XP he had. __________________ MoBo) KT400 Dragon Ultra CPU) 1900+ XP@ stock for now Ram) Geil 512mb PC3200 Cas 2 Cooling) MCW462-UHT Video) GF4 TI4600@320/730 Sound) Audigy X-Gamer

01-08-2003, 09:38 AM	#13
Miss_Man Cooling Savant Join Date: Dec 2000 Posts: 151	I've quit PC-hobbying for some time now but if you're interested, here's how I was cooling the 2 x 172s, 1 x 65 and 1 x 80w pelts and the water. I know you dont have room for that. If you're in for a detailed read about it, you can go here. http://www.overclockers.com/tips1003/ http://www.overclockers.com/tips800/

01-08-2003, 06:41 PM	#14
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	So NOW what are you into Miss_Man? __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)