|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
Thread Tools |
03-03-2001, 09:44 PM | #1 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
KT7A voltage mod question
ok, I just ordered my second KT7A-RAID...and this time I want to do it right...
I have heard that with the new KT7A, you can't use 15Kohm resistor like with the KT7...I hear that you have to use something like 22-24Kohm resistor... but I didn't think the board was any different than the KT7 aside from the chipset... does anyone have the KT7A with a voltage mod that can tell me what resistor was used and what the voltage is when you set bios to 1.85? thanks....also, it's BC153 right, or can I solder straight to the #7 leg of the HIP chip? [This message has been edited by Cablepro (edited 03-03-2001).] |
03-04-2001, 12:40 AM | #2 |
Cooling Savant
Join Date: Apr 2000
Location: Bremerton, WA
Posts: 514
|
This page covers KT7 and KT7A..
http://www.ocinside.de/index_e.html?...kt7_vcore.html ------------------ The UnaClocker Overclock till it goes BOOM! Watercooler extraordinaire! |
03-04-2001, 02:27 AM | #3 |
Cooling Neophyte
Join Date: Mar 2001
Posts: 1
|
Look here... they have some good articles on ABit KT7 voltage mod.
Phase 1 Volt Mod Phase 2 Volt Mod |
03-04-2001, 02:27 AM | #4 |
Cooling Neophyte
Join Date: Jan 2001
Location: Daytona Beach, FL USA
Posts: 93
|
thanks...but i'm having trouble with that link =(
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|