|
|
Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
Thread Tools |
09-26-2003, 11:30 PM | #1 |
Cooling Neophyte
Join Date: Aug 2003
Location: Dalian China
Posts: 56
|
same design,different result?
murks 3 vs this one: wath's the reason?
__________________
MSN: watercoolerking@msn.com Last edited by watercoolerking; 09-27-2003 at 06:05 AM. |
09-27-2003, 07:11 AM | #2 |
Cooling Neophyte
Join Date: Sep 2003
Location: China.GD.FS
Posts: 2
|
hahaha
__________________
hahaha |
09-27-2003, 09:17 AM | #3 | |
Cooling Neophyte
Join Date: Feb 2003
Location: Germany
Posts: 4
|
Re: same design,different result?
Quote:
http://www.kaltmacher.de/viewtopic/t-23050.html Of course, you'll also find some more pics there aswell. The test results of WCP can be seen here: http://www.watercoolplanet.de/index.php?open=4&show=2 His homepage with additional pictures: http://www.bernd-haller.de/selbstbau_wasserkuehler.htm Actually, this block only shares some similarities with the "Murks3". It's a different design - this block has 36 jets/cups vs. the "unknown number" of the Murks3 REV1.1 (couldn't find this info anywhere) and the Murks3 with 25 jets/cups. Regards, dot |
|
09-27-2003, 10:59 PM | #4 |
Cooling Neophyte
Join Date: Aug 2003
Location: Dalian China
Posts: 56
|
is the number of jets cost so much differents?
__________________
MSN: watercoolerking@msn.com |
09-29-2003, 09:47 AM | #5 |
Cooling Neophyte
Join Date: Jan 2003
Location: Germany
Posts: 17
|
Its not only the number of jets. The number, baseplate thickness, jet ID, ID, Jet length, hole depth, hole adjustment, the hole/jet ratio and a lot of other facts affect the performance.
The Murks 3 is and the cooler above are quite close by the way (0.60°K difference). |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|