debug on port 81

mmcool · 07-29-2009, 12:43 PM

Hi folks,

Http on port 81 gets the GOS debug console.
How does one set the password for access? It appears to be different from the admin password...

MM

blue68f100 · 08-02-2009, 01:58 PM

If your trying to get access to root you must use the osshell cmd. Enter the admin password when prompted. Users access with admin rights will not work, must be admin/PW.

matery · 08-03-2009, 02:26 PM

You can access debug mode on GOS 5 using http://(IP ADDRESS)/cadmin/debug.cgi

07-29-2009, 12:43 PM	#1
mmcool Cooling Neophyte Join Date: Apr 2007 Location: Woods Hole, MA Posts: 6	debug on port 81 Hi folks, Http on port 81 gets the GOS debug console. How does one set the password for access? It appears to be different from the admin password... MM

08-02-2009, 01:58 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: debug on port 81 If your trying to get access to root you must use the osshell cmd. Enter the admin password when prompted. Users access with admin rights will not work, must be admin/PW. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

08-03-2009, 02:26 PM	#3
matery Cooling Neophyte Join Date: Jul 2006 Location: london Posts: 29	Re: debug on port 81 You can access debug mode on GOS 5 using http://(IP ADDRESS)/cadmin/debug.cgi

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)