so what to seal the danner with?

ambient · 05-26-2002, 11:15 PM

Will be sealing a danner 5 soon. I have silicone, great white pipe joint compound with teflon, sportsmans goop. I may need to take it apart in the future. I was thinking of just going with silicone, will this hold up?

Cyco-Dude · 05-27-2002, 07:34 AM

i used Permatex water pump / thermostat housing RTV silicone to seal the housing (which you will need to do, because it will leak). you can buy it from any auto-parts store for 2 bucks.
i used teflon tape to seal the brass barbs i put on. the pump was tested for several hours and it did not leak.

ambient · 05-27-2002, 07:30 PM

you think some GE kithen and bath 100% silicone is good enough? The kind for a caulk gun. That is what I have.

Cyco-Dude · 05-28-2002, 03:46 PM

as long as it can provide a watertight seal it should be ok for sealing the housing. do not use it to seal the barbs tho, use teflon tape only.

05-26-2002, 11:15 PM	#1
ambient Cooling Savant Join Date: Jan 2002 Location: Planet Earth Posts: 312	so what to seal the danner with? Will be sealing a danner 5 soon. I have silicone, great white pipe joint compound with teflon, sportsmans goop. I may need to take it apart in the future. I was thinking of just going with silicone, will this hold up? __________________ water cooled 1.4 tbird @ 1580 143x11 vcore 1.88 vio 3.55

05-27-2002, 07:30 PM	#3
ambient Cooling Savant Join Date: Jan 2002 Location: Planet Earth Posts: 312	you think some GE kithen and bath 100% silicone is good enough? The kind for a caulk gun. That is what I have. __________________ water cooled 1.4 tbird @ 1580 143x11 vcore 1.88 vio 3.55

05-27-2002, 07:34 AM	#2
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	i used Permatex water pump / thermostat housing RTV silicone to seal the housing (which you will need to do, because it will leak). you can buy it from any auto-parts store for 2 bucks. i used teflon tape to seal the brass barbs i put on. the pump was tested for several hours and it did not leak.

05-28-2002, 03:46 PM	#4
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	as long as it can provide a watertight seal it should be ok for sealing the housing. do not use it to seal the barbs tho, use teflon tape only.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)