Go Back   Pro/Forums > ProCooling Technical Discussions > Heatsink/ Heat Pipe / ThermoSiphon Cooling
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Heatsink/ Heat Pipe / ThermoSiphon Cooling The cat will only make the mistake of putting its paw by your HSF once. :) Also the place to discuss the new high end heat pipe goodness.

Reply
Thread Tools
Unread 09-19-2003, 01:42 PM   #1
sevisehda
Cooling Savant
 
Join Date: May 2003
Location: NY
Posts: 234
Default Hurricane Isa...erm...I mean Delta

Luckily the UPS driver braved the remants of Hurricane Isabel to deliver my order of fans. The stars of my order were 4 Delta FFB0912EHEs. These are rated at 110CFM/0.6inH20 at 55dcb. When I first plugged them in they flew over my desk and dangled by their cords. Once I managed to restrain them they were disturbing some papers on the shelves 6ft away from them. Luckily they will run at as low as 5v and at that speed there quiet.

I only plan on using 2 of the on my rad but I got 4 because the place had a min order of 25$.
sevisehda is offline   Reply With Quote
Unread 09-19-2003, 02:48 PM   #2
jaydee
Put up or Shut Up
 
jaydee's Avatar
 
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
Default

I got some 120CFM Delta 120mm's at home. Very loud and very fast fans. I paid $1.99 each for them a couple years back. Can't remember where I got them though..... Should have bought more.
jaydee is offline   Reply With Quote
Unread 10-10-2003, 10:01 PM   #3
SparkedFire
Cooling Savant
 
SparkedFire's Avatar
 
Join Date: Apr 2003
Location: The Matrix
Posts: 114
Default

I am going to pick up 2 120mm fans that push 152 CFM! These are at cooltechnica. only $10 each, but shipping is extra. i am going to pick up a rheostat (someware), to lower the fan spped when use is at a minimum..
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel.

As to watercooling going mainstream:
We are truely dedicated to it, we know everything, and we have perfected it.
SparkedFire is offline   Reply With Quote
Unread 10-10-2003, 10:43 PM   #4
Blackeagle
Thermophile
 
Join Date: Oct 2002
Location: U.S.A = Michigan
Posts: 1,243
Default

Those 152CFM Delta's have been out of stock for quite some time on the web site.

Considered them myself, but opted for the 130CFM ones instead.
Blackeagle is offline   Reply With Quote
Unread 10-10-2003, 10:46 PM   #5
SparkedFire
Cooling Savant
 
SparkedFire's Avatar
 
Join Date: Apr 2003
Location: The Matrix
Posts: 114
Default

really? huh.
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel.

As to watercooling going mainstream:
We are truely dedicated to it, we know everything, and we have perfected it.
SparkedFire is offline   Reply With Quote
Unread 10-11-2003, 03:27 AM   #6
sevisehda
Cooling Savant
 
Join Date: May 2003
Location: NY
Posts: 234
Default

Hmm I got my fans for $4 a piece. Try http://www.excess-solutions.com./12vdc_fans.htm

The granddaddy of all axial fans has to ge a Delta FFB1212EHE, 190CFM.
__________________
CPU: Barton2500 @ 2.43 ghz
MB: NF7S Rev2
RAM: 2x 256mb Kingston HyperX 3500
HD's: 2x 160gb SATA RAID
GPU: Sapphire X800Pro VIVO -> XT Plat(softmod) 520/590
sevisehda is offline   Reply With Quote
Unread 10-11-2003, 06:55 AM   #7
Boli
Cooling Savant
 
Boli's Avatar
 
Join Date: Apr 2003
Location: Blackburn / Dundee
Posts: 451
Default

Hopefully you won't try the thing I did to see if the fan was spinning when it was on low voltage - tried to touch the centre of the fan to see if it where turning (counln't see the fan) put finger in blades - hurt like hell and ripped all the blades OFF the fan - a spinning hub doesn't move much air.

~ Boli
__________________
1800+ @ 2247 (214x10.5) - STABLE, 512MB PC3700 TwinX Cosair RAM, NF7-S v2.0, GeForce3 Ti200
Parallel BIM, 120.1 Thermochill, Eheim 1048, Maze 3, Maze4 GPU, "Z" chipset, 1/2" tubing, PC-70: 5x120mm & 9x80mm fans.
Internet Server & second machine (folding 24/7): 512MB DDR RAM, XP2000+
Boli is offline   Reply With Quote
Unread 10-11-2003, 10:00 AM   #8
jaydee
Put up or Shut Up
 
jaydee's Avatar
 
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
Default

Quote:
Originally posted by Boli
Hopefully you won't try the thing I did to see if the fan was spinning when it was on low voltage - tried to touch the centre of the fan to see if it where turning (counln't see the fan) put finger in blades - hurt like hell and ripped all the blades OFF the fan - a spinning hub doesn't move much air.

~ Boli
Been there, done that except my finger gave more than the fan. Those 120cfm'ers have tough blade's.

Also that link sevisehda postes I am pretty sure is the place I got my 120's for $1.99. Don't see them there now though.

Also try www.allelectronics.com for fans and rheostats and LED's ect...
jaydee is offline   Reply With Quote
Unread 10-11-2003, 10:04 AM   #9
BillA
CoolingWorks Tech Guy
Formerly "Unregistered"
 
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
Default

Quote:
Originally posted by Boli
Hopefully you won't try the thing I did to see if the fan was spinning when it was on low voltage - tried to touch the centre of the fan to see if it where turning (counln't see the fan) put finger in blades - hurt like hell and ripped all the blades OFF the fan - a spinning hub doesn't move much air.

~ Boli
you are VERY lucky
I accidently stuck a little finger barely into one and damned near lost the whole thing
blood everywhere
BillA is offline   Reply With Quote
Unread 10-11-2003, 12:30 PM   #10
SparkedFire
Cooling Savant
 
SparkedFire's Avatar
 
Join Date: Apr 2003
Location: The Matrix
Posts: 114
Default

yea, i cut my hand on one of those stupid fans. and it only pushed 80cfm
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel.

As to watercooling going mainstream:
We are truely dedicated to it, we know everything, and we have perfected it.
SparkedFire is offline   Reply With Quote
Unread 10-20-2003, 01:51 AM   #11
sevisehda
Cooling Savant
 
Join Date: May 2003
Location: NY
Posts: 234
Default

After a little accident(computer rolling off desk) I did some reworking of the airflow through my case. Originally I had 3 fans, 2 of the 92mm Deltas sucking air through my rad and then 1 120mm exausting air out through the PS. After some brainstorming in another thread I got the idea to have no intake and move the 2 92mm Deltas to the normal rear exaust fan ports. The idea being since my case is sealed the only place for air to come in is through the rad. Well it worked except the 120mm on the PS wasn't moving any air because it provided crap for pressure and the 92mm were overpowering it. So I made a small 120mm>92mm fan adapter and mounted another 92mm Delta to it.

So I now have 3 of the uber-fans sucking air out of my case. At 12v and 55db a piece its quite loud, luckily they still move enough air at 5v. The only problem with this arrangment is to get any cooling the sides have to be on the case, so clearing the CMOS is going to be a pain from now on. Once the last coat of tar drys I'll fire it up and post the results.
__________________
CPU: Barton2500 @ 2.43 ghz
MB: NF7S Rev2
RAM: 2x 256mb Kingston HyperX 3500
HD's: 2x 160gb SATA RAID
GPU: Sapphire X800Pro VIVO -> XT Plat(softmod) 520/590
sevisehda is offline   Reply With Quote
Unread 10-20-2003, 11:38 AM   #12
mad mikee
Cooling Savant
 
Join Date: Oct 2001
Location: US of A!!!!
Posts: 146
I reset my cmos w/o opening the case

Doesn't everyone:shrug:

Soyo makes a 6-way card reader w/ a reset-cmos button,use it alot w/ testing OC capabilities of new bios, CPU, mem, etc.,
__________________
His PCV2000
DFI ULTRA D (SLI Modded just because) 4200 x2 @ ~ 10 x 260 /1.49 Vcore , G5 + PA160 + 150mm Papst@5V + Maze 4 GPU + mcp350. Temp 36-37(load-2 x D20L) 2x1GB Ballistix PC4000, x800xl 256m, 74G rap + 160G Hitachi SATA , 21" mit/nec 1920x1440 Crt + 19 Neovo F-419 1280x1024 LCD, OCZ Powerstream 600

Hers: (my beloved who lets me do all this)
LianLi PCV1000, SD3700 @ 9x300, 1GB GBLA, 250+ 120 SATA, X700pro, 19" Neovo F-419 LCD, another OCZ 600
mad mikee is offline   Reply With Quote
Unread 10-20-2003, 02:29 PM   #13
sevisehda
Cooling Savant
 
Join Date: May 2003
Location: NY
Posts: 234
Default

I finally have some pics.





The HD bay and wiring looks looks like crap, its just there until I can fix my RAID0 array. I smashed an IC on one of the drives and am trying to find a way to recover the data from the drive. I'm also planning on replacing the Johnson pump with a dual setup of some kind.

Once I get some chocks made I'll put the casters back on. I'm thinking the 3 exaust fans will be strong enough to propel it across my desk.
__________________
CPU: Barton2500 @ 2.43 ghz
MB: NF7S Rev2
RAM: 2x 256mb Kingston HyperX 3500
HD's: 2x 160gb SATA RAID
GPU: Sapphire X800Pro VIVO -> XT Plat(softmod) 520/590
sevisehda is offline   Reply With Quote
Unread 10-20-2003, 09:42 PM   #14
Boli
Cooling Savant
 
Boli's Avatar
 
Join Date: Apr 2003
Location: Blackburn / Dundee
Posts: 451
Default

New Sport: Computer Racing!
__________________
1800+ @ 2247 (214x10.5) - STABLE, 512MB PC3700 TwinX Cosair RAM, NF7-S v2.0, GeForce3 Ti200
Parallel BIM, 120.1 Thermochill, Eheim 1048, Maze 3, Maze4 GPU, "Z" chipset, 1/2" tubing, PC-70: 5x120mm & 9x80mm fans.
Internet Server & second machine (folding 24/7): 512MB DDR RAM, XP2000+
Boli is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:57 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...