Snap OS 3.4.805, anyone? - Page 6

blue68f100 · 05-25-2006, 04:27 PM

If you have two ide controllers (M/S or CS) then its a 4000. The 4100 has 4 seperate ide controllers.

As for as the OS know is the number of drives( 1,2,4,12). My 2200 reports as a 2000.

evilwraith · 05-25-2006, 05:24 PM

I have a Snap 4100 running 3.4.770, 2.4.437 BIOS, Hardware rev 2.2.1. I too am looking for these magical updates that make the Snap happier with modern operating systems. Can anyone provide a clue?

blue68f100 · 05-25-2006, 05:57 PM

The 4100 has OS stored in Flashram. It's a headless computer with limited hardware (cpu, ram, hd controllers and nic). No one has tried to load a different OS. There is no way to do it, with out having the developers test hardware and software. The flashram is soldered in place, so it can't be easly replaced. The Snap OS originated from the FreeBSD, unix flavor. We would be happy to figure away to get LBA48Bit support (hd >137gig). Which would require a BIOS upgrade to fix the raid controller firmware, which SnapAppliance will not do.

Unless you require MS 2003 AD, there is not a whole lot of options.

The price of these units keep coming down, making them attractive for home users.

Phoenix32 · 05-25-2006, 08:47 PM

Quote:

Originally Posted by re3dyb0y

Is sam heck me?

I'll send you an email

Yes, and Thank you....

Now for another OS question (while the Wiki is down). Other than for MS Active Directory (which I will need to do in about 4 months), is there ANY advantage to OS 4.xx.xx? If so, which version is best?

And, will the same 3.4.805 for a Snap 4000 work on a Snap 1000?

Phoenix32 · 05-25-2006, 08:50 PM

Quote:

Originally Posted by jontz

Yes, the 4100's report themselves as a 4000 series. If it is 1U, then it is a 4100, if it is 2U, then it is a 4000. There weren't any 2U versions of the 4100 and vice versa.

Any Idea why that Quantum Model Number does not come up on a Google search?

(70700042-004)

Phoenix32 · 05-25-2006, 08:53 PM

Quote:

Originally Posted by blue68f100

If you have two ide controllers (M/S or CS) then its a 4000. The 4100 has 4 seperate ide controllers.

Mine must be a 4000 then. It is 2U and has 2 IDE connectors, not 4. Set up as Cable Select I think by the looks of the cables (rainbow with slots cut in them), but I dunno, it came with no drives...

jontz · 05-25-2006, 09:56 PM

Quote:

Originally Posted by Phoenix32

Any Idea why that Quantum Model Number does not come up on a Google search?

(70700042-004)

If you drop the -004 off of the end it does come up in google, although there isn't a link to a product page or anything. The -00x seems to just be the revision number of the unit. Evidentally Adaptec doesn't have anything on their website that references the 4000 series by model number, only by product name.

blue68f100 · 05-25-2006, 10:10 PM

Here is some more artifacts on the 4000's:

Models -002 were set as M/S = 40 connector
Models -003 and greater were CS and a 80 connector

Other than AD no other advantage for v4 since 3.4.805 supports HD >137gig.

re3dyb0y · 05-26-2006, 04:25 AM

Quote:

Originally Posted by Phoenix32

Yes, and Thank you....

Now for another OS question (while the Wiki is down). Other than for MS Active Directory (which I will need to do in about 4 months), is there ANY advantage to OS 4.xx.xx? If so, which version is best?

And, will the same 3.4.805 for a Snap 4000 work on a Snap 1000?

It depends what MS active directory you using

If it is a Windows Server 2003, you will need OS v4, otherwise v3 is fine.

IF you are using 2003, you will need .860, as it implements security fix from MS (If the wiki was up, i could tell you what), but you will have installed it, so you will problbly need 4.0.860

Phoenix32 · 05-26-2006, 03:28 PM

Quote:

Originally Posted by re3dyb0y

It depends what MS active directory you using

If it is a Windows Server 2003, you will need OS v4, otherwise v3 is fine.

IF you are using 2003, you will need .860, as it implements security fix from MS (If the wiki was up, i could tell you what), but you will have installed it, so you will problbly need 4.0.860

Crap!

Guess which OS we will be using? Yep, you guessed it, Win 2003 Server... Guess I will be shopping around for whatever v4.x OS I will need.

blue68f100 · 05-26-2006, 04:10 PM

The 4x00 runs fine with 4.0.860 if you have a min of 128meg, as normal more is better.

Phoenix32 · 05-26-2006, 07:01 PM

Quote:

Originally Posted by blue68f100

The 4x00 runs fine with 4.0.860 if you have a min of 128meg, as normal more is better.

It came with 64meg in it, I changed it to a 128meg, and as soon as I find it, I have a 256meg I will be putting in. Now all I have to do is find the 4.0.860 (or a version I can upgrade with the adaptec download).

Curious, why does the 4.0.860 need the extra memory that 3.x.x doesn't?

BTW, have I said thank you to all you Snap Guru guys and gals? If not, Thank you, I am glad to see people willing to help others these days.

blue68f100 · 05-27-2006, 10:45 AM

With the extra demons that are required for MS AD and the large disk require a little extra ram inorder to run smoothly.

Phoenix32 · 05-27-2006, 12:38 PM

Quote:

Originally Posted by blue68f100

With the extra demons that are required for MS AD and the large disk require a little extra ram inorder to run smoothly.

Makes sense to me. Besides, it has the letters MS attached, that always means more memory, more processor, and more crashes as a bonus.

jim_trethewey · 05-28-2006, 01:33 AM

At the risk of saying "me too!"....

My Snap 4100 is serial # 500104, software 2.4.437, hardware 2.2.1, firmware 2.4.437. When I try to use Snap! Assist or the OSUpdate command-line tool to upgrade it to 4.0.860 (Snap_4_x.sup), I get the message "this file is not a valid upgrade for your server." Is there an upgrade path for my server, or is it just too old? Might it be possible to upgrade from 2.4.437 to an intermediate version line 3.4.805, and then go up to 4.0.860 from there?

I have a second 4100 (#570764) that upgraded from 4.0.854 to 4.0.860 with no hassle (so I have some confidence that I know how to do the "easy ones").

Quote:

Originally Posted by evilwraith

I have a Snap 4100 running 3.4.770, 2.4.437 BIOS, Hardware rev 2.2.1. I too am looking for these magical updates that make the Snap happier with modern operating systems. Can anyone provide a clue?

Phoenix32 · 05-28-2006, 02:10 AM

Quote:

Originally Posted by jim_trethewey

At the risk of saying "me too!"....

My Snap 4100 is serial # 500104, software 2.4.437, hardware 2.2.1, firmware 2.4.437. When I try to use Snap! Assist or the OSUpdate command-line tool to upgrade it to 4.0.860 (Snap_4_x.sup), I get the message "this file is not a valid upgrade for your server." Is there an upgrade path for my server, or is it just too old? Might it be possible to upgrade from 2.4.437 to an intermediate version line 3.4.805, and then go up to 4.0.860 from there?

I have a second 4100 (#570764) that upgraded from 4.0.854 to 4.0.860 with no hassle (so I have some confidence that I know how to do the "easy ones").

The 4.0.860 is an update patch, not a full OS. You need to have a 4.x.x already on the Snap Server to use the 4.0.860 Patch, which is why your 4100 had no problems using the update.

OS 3.4.805 is probably all you need, unless you need to use MS Active Directory. In which case, you need 4.0.860 for the MS AD.

FYI, I am not a Snap expert. I am just passing on the help that was recently given to me. Experts please correct me here if I have steered him incorrectly.

blue68f100 · 05-28-2006, 07:44 AM

The 4.0.854 is a full version, use it, then move up to the 4.0.860

Unsnapped · 05-31-2006, 05:15 PM

I need 3.4.805 as well. I've been running into problems with 3.2.671 and have no problems on 3.4.803, so I'm hoping 3.4.805 will fix them.

Can someone please email me the SUP file?

blue68f100 · 05-31-2006, 06:53 PM

What kind of problems are you having?

803 to 805 has no bug fixes, it added hardware support.

Give me your snap vitals, Model, HW, BIOS versions. This info can be found by clicking on the SnapAppliance Logo on the admin page.

DIRT5150 · 06-05-2006, 06:05 PM

Where can I get a copy of the 3.4.805 OS? I heard it was Free to upgrade to it correct? I can give Serial number and all that if needed would just like to upgrade to new OS on Snapserver 2000. Considering Adaptec Takeover I cant find OS upgrade anywhere on there site.

blue68f100 · 06-05-2006, 07:54 PM

Are you sure yours model is upgradeable.

Click on the SnapAppliance Logo from the admin page and post results.

V1 2000 have problem with hd >137gig, LBA48 bit support NOT.

adamburrett · 06-06-2006, 05:37 AM

hi,
I've got a dell 705n NAS,
And I would like to upgrade the disks,

can someone point me to the location of the 3.4.8xx updates,

my email is :
adam.burrett@ultratec.co.uk

Thanks very much (in advance)

Adam

DIRT5150 · 06-06-2006, 10:28 AM

Quote:

Originally Posted by DIRT5150

Where can I get a copy of the 3.4.805 OS? I heard it was Free to upgrade to it correct? I can give Serial number and all that if needed would just like to upgrade to new OS on Snapserver 2000. Considering Adaptec Takeover I cant find OS upgrade anywhere on there site.

Again I would like to know where to get OS version 3.4.805? If anyone could help it would be greatly appreciated.

Snap Server = 2000
Software 2.3.417
HArdware 2.0.0
Serial # 46164
BIOS 2.0.282

email dirt5150@socal.rr.com

Thanks

blue68f100 · 06-06-2006, 12:35 PM

You have a v2 2000, which has the DIMM memory. And is upgradeable to large disk with out any problem.

end3rtm · 06-07-2006, 11:35 AM

I'm so glad I found this forum. I've been bugging Adaptec for such a long time trying to get the latest firmware and I just can't get through to anybody who knows what they are doing over there....

I have 3 questions / problems:

1. I need to update the firmware to something that'll support bigger HD than 130GB. I think from looking at the forum, it's at least 3.4.805? Can someone PLEASE email me whichever version that will work with the big drives? I tried 2 300GB drives and it's coming out as something around 130GB... If you can send me the firmware, I'd be very greatful.

This is my Hardware settings:
Model: 2000 series
Software: 3.4.772
Hardware: 2.0.0
Server: 34999
BIOS: 2.0.252

2. Is there a clock battery in this thing? No matter what I do to make the IP address static, it keeps on reverting back to Dynamic. Have you guys seen this before?

3. What type of memory do I need to upgrade the unit? I've looked around the Wiki and the forum and bit and I couldn't see it... Is it a PC100 DIMM? Or something lot older?

ANY HELP WOULD BE GREATLY APPRECIATED~!

Thank you.

05-25-2006, 04:27 PM	#126
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? If you have two ide controllers (M/S or CS) then its a 4000. The 4100 has 4 seperate ide controllers. As for as the OS know is the number of drives( 1,2,4,12). My 2200 reports as a 2000. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-25-2006, 05:24 PM	#127
evilwraith Cooling Neophyte Join Date: May 2006 Location: Charlotte Posts: 1	Re: Snap OS 3.4.805, anyone? I have a Snap 4100 running 3.4.770, 2.4.437 BIOS, Hardware rev 2.2.1. I too am looking for these magical updates that make the Snap happier with modern operating systems. Can anyone provide a clue?

05-25-2006, 05:57 PM	#128
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? The 4100 has OS stored in Flashram. It's a headless computer with limited hardware (cpu, ram, hd controllers and nic). No one has tried to load a different OS. There is no way to do it, with out having the developers test hardware and software. The flashram is soldered in place, so it can't be easly replaced. The Snap OS originated from the FreeBSD, unix flavor. We would be happy to figure away to get LBA48Bit support (hd >137gig). Which would require a BIOS upgrade to fix the raid controller firmware, which SnapAppliance will not do. Unless you require MS 2003 AD, there is not a whole lot of options. The price of these units keep coming down, making them attractive for home users. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-25-2006, 10:10 PM	#133
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? Here is some more artifacts on the 4000's: Models -002 were set as M/S = 40 connector Models -003 and greater were CS and a 80 connector Other than AD no other advantage for v4 since 3.4.805 supports HD >137gig. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-26-2006, 04:10 PM	#136
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? The 4x00 runs fine with 4.0.860 if you have a min of 128meg, as normal more is better. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-27-2006, 10:45 AM	#138
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? With the extra demons that are required for MS AD and the large disk require a little extra ram inorder to run smoothly. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-28-2006, 07:44 AM	#142
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? The 4.0.854 is a full version, use it, then move up to the 4.0.860 __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

05-31-2006, 05:15 PM	#143
Unsnapped Cooling Neophyte Join Date: May 2006 Location: Oakland Posts: 1	Re: Snap OS 3.4.805, anyone? I need 3.4.805 as well. I've been running into problems with 3.2.671 and have no problems on 3.4.803, so I'm hoping 3.4.805 will fix them. Can someone please email me the SUP file?

05-31-2006, 06:53 PM	#144
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? What kind of problems are you having? 803 to 805 has no bug fixes, it added hardware support. Give me your snap vitals, Model, HW, BIOS versions. This info can be found by clicking on the SnapAppliance Logo on the admin page. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

06-05-2006, 06:05 PM	#145
DIRT5150 Cooling Neophyte Join Date: Jun 2006 Location: California Posts: 2	Re: Snap OS 3.4.805, anyone? Where can I get a copy of the 3.4.805 OS? I heard it was Free to upgrade to it correct? I can give Serial number and all that if needed would just like to upgrade to new OS on Snapserver 2000. Considering Adaptec Takeover I cant find OS upgrade anywhere on there site.

06-05-2006, 07:54 PM	#146
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? Are you sure yours model is upgradeable. Click on the SnapAppliance Logo from the admin page and post results. V1 2000 have problem with hd >137gig, LBA48 bit support NOT. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

06-06-2006, 05:37 AM	#147
adamburrett Cooling Neophyte Join Date: Jun 2006 Location: Baldock Posts: 1	Re: Snap OS 3.4.805, anyone? hi, I've got a dell 705n NAS, And I would like to upgrade the disks, can someone point me to the location of the 3.4.8xx updates, my email is : adam.burrett@ultratec.co.uk Thanks very much (in advance) Adam

06-06-2006, 12:35 PM	#149
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? You have a v2 2000, which has the DIMM memory. And is upgradeable to large disk with out any problem. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

06-07-2006, 11:35 AM	#150
end3rtm Cooling Neophyte Join Date: Jun 2006 Location: CA Posts: 1	Re: Snap OS 3.4.805, anyone? I'm so glad I found this forum. I've been bugging Adaptec for such a long time trying to get the latest firmware and I just can't get through to anybody who knows what they are doing over there.... I have 3 questions / problems: 1. I need to update the firmware to something that'll support bigger HD than 130GB. I think from looking at the forum, it's at least 3.4.805? Can someone PLEASE email me whichever version that will work with the big drives? I tried 2 300GB drives and it's coming out as something around 130GB... If you can send me the firmware, I'd be very greatful. This is my Hardware settings: Model: 2000 series Software: 3.4.772 Hardware: 2.0.0 Server: 34999 BIOS: 2.0.252 2. Is there a clock battery in this thing? No matter what I do to make the IP address static, it keeps on reverting back to Dynamic. Have you guys seen this before? 3. What type of memory do I need to upgrade the unit? I've looked around the Wiki and the forum and bit and I couldn't see it... Is it a PC100 DIMM? Or something lot older? ANY HELP WOULD BE GREATLY APPRECIATED~! Thank you.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)