Csp Mag Ii ???

Szandor · 04-19-2006, 06:11 AM

Hi!

I'm starting my layout & parts list for a SFF water cooled set-up & was wondering if there is any further news on the CSP MAG II & when it might be available for purchase, anyone have any updates???

Regards, Szandor

Dave · 04-22-2006, 06:27 AM

Sorry been away yet again.

This week I believe and we only Sell OEM now, so it will have another company name on it.

Can say who's... not my place too do so.

I also understand they may offer 12W and 16W units soon as well.

Szandor · 04-22-2006, 06:33 AM

Thanks for the update Dave!

Will the base model still be 8W or do the 12W & 16W models replace them?

I'll keep an eye out for the pump

Regards, Szandor

Dave · 04-23-2006, 06:26 AM

8W is all you really need, but it is hard for people to understand this

8W standard, 12W and 16W units my be offered by our client, it is not up to me.

Szandor · 04-23-2006, 10:03 AM

Yeah, the 8W model would be fine for my uses, I was just waiting for the MAG II as you had said there would be some design changes/tweaks.

Will the 8W model get the upgrade to the new design or only the 12W & 16W models?

Thanks again for the info!

Regards, Szandor

JamesAvery22 · 04-25-2006, 11:55 AM

is the Mag-II related to the pump mentioned here?

New pump big enough?

Any specs on any of the 8W standard, 12W and 16W units?

Szandor · 04-25-2006, 03:45 PM

Looks to me like that thread concerns a custom OEM pump for AVT

He's talkinng about 25-30watt power consumption as well

Lee "Robotech" Garbutt did a reivew of the standard 8watt model available now at Danger Den & others though his was the 3/8" barb version with the input & output on the same side of the pump.

Regards, Szandor

Dave · 05-05-2006, 08:00 AM

Guys it is like this, AVT nor C-Systems no longer has any interest in the retail market.

However many of our clients do, and so I can not comment on what we do or do not have in an open forum.

There are several pumps coming on the market (or already out) using our technology, in different wattages, flows, and pressures.

It is best you ask companies like Danger Den whats coming, and what you would like.

We are producing a different pump almost every month here, and some should find there way to retail.

As for MAG II, it's has small changes over MAG I, in bearing, impeller, and stator design. The main difference being all injected case, and therefore cost savings.

What I would like to really see, is a company willing to risk releasing our magnetic suspension- fluid bearing only models to general public. This units are very quite and are at date only being used by OEM companies in sealed closed loop systems. The risk being these pumps must have 100% clean fluid, any particles will damage pump. Also likely clear to everyone, you can not run them dry - what so ever.

JamesAvery22 · 05-05-2006, 08:56 AM

Thanks for the clarifications Dave. There aren't many posts here but I know a lot of people are watching and I'm sure they appreciate the info

Soooo who works at DD??

ProHandyman · 05-05-2006, 03:31 PM

Here is a retail magnum: FluidXP+ Magnum. It is of the 8 watt variety. not sure if they, or who else will be coming out with others, other then possibly DD.

04-19-2006, 06:11 AM	#1
Szandor Cooling Neophyte Join Date: Mar 2003 Location: Massachusetts U.S.A. Posts: 24	Csp Mag Ii ??? Hi! I'm starting my layout & parts list for a SFF water cooled set-up & was wondering if there is any further news on the CSP MAG II & when it might be available for purchase, anyone have any updates??? Regards, Szandor

04-22-2006, 06:27 AM	#2
Dave Cooling Savant Join Date: Oct 2004 Location: Canada Posts: 260	Re: Csp Mag Ii ??? Sorry been away yet again. This week I believe and we only Sell OEM now, so it will have another company name on it. Can say who's... not my place too do so. I also understand they may offer 12W and 16W units soon as well.

04-22-2006, 06:33 AM	#3
Szandor Cooling Neophyte Join Date: Mar 2003 Location: Massachusetts U.S.A. Posts: 24	Re: Csp Mag Ii ??? Thanks for the update Dave! Will the base model still be 8W or do the 12W & 16W models replace them? I'll keep an eye out for the pump Regards, Szandor

04-23-2006, 06:26 AM	#4
Dave Cooling Savant Join Date: Oct 2004 Location: Canada Posts: 260	Re: Csp Mag Ii ??? 8W is all you really need, but it is hard for people to understand this 8W standard, 12W and 16W units my be offered by our client, it is not up to me.

04-23-2006, 10:03 AM	#5
Szandor Cooling Neophyte Join Date: Mar 2003 Location: Massachusetts U.S.A. Posts: 24	Re: Csp Mag Ii ??? Yeah, the 8W model would be fine for my uses, I was just waiting for the MAG II as you had said there would be some design changes/tweaks. Will the 8W model get the upgrade to the new design or only the 12W & 16W models? Thanks again for the info! Regards, Szandor

04-25-2006, 11:55 AM	#6
JamesAvery22 Cooling Savant Join Date: May 2004 Location: Northern VA Posts: 383	Re: Csp Mag Ii ??? is the Mag-II related to the pump mentioned here? New pump big enough? Any specs on any of the 8W standard, 12W and 16W units? __________________ Stabbing. My Heatware

04-25-2006, 03:45 PM	#7
Szandor Cooling Neophyte Join Date: Mar 2003 Location: Massachusetts U.S.A. Posts: 24	Re: Csp Mag Ii ??? Looks to me like that thread concerns a custom OEM pump for AVT He's talkinng about 25-30watt power consumption as well Lee "Robotech" Garbutt did a reivew of the standard 8watt model available now at Danger Den & others though his was the 3/8" barb version with the input & output on the same side of the pump. Regards, Szandor

05-05-2006, 08:00 AM	#8
Dave Cooling Savant Join Date: Oct 2004 Location: Canada Posts: 260	Re: Csp Mag Ii ??? Guys it is like this, AVT nor C-Systems no longer has any interest in the retail market. However many of our clients do, and so I can not comment on what we do or do not have in an open forum. There are several pumps coming on the market (or already out) using our technology, in different wattages, flows, and pressures. It is best you ask companies like Danger Den whats coming, and what you would like. We are producing a different pump almost every month here, and some should find there way to retail. As for MAG II, it's has small changes over MAG I, in bearing, impeller, and stator design. The main difference being all injected case, and therefore cost savings. What I would like to really see, is a company willing to risk releasing our magnetic suspension- fluid bearing only models to general public. This units are very quite and are at date only being used by OEM companies in sealed closed loop systems. The risk being these pumps must have 100% clean fluid, any particles will damage pump. Also likely clear to everyone, you can not run them dry - what so ever.

05-05-2006, 08:56 AM	#9
JamesAvery22 Cooling Savant Join Date: May 2004 Location: Northern VA Posts: 383	Re: Csp Mag Ii ??? Thanks for the clarifications Dave. There aren't many posts here but I know a lot of people are watching and I'm sure they appreciate the info Soooo who works at DD?? __________________ Stabbing. My Heatware

05-05-2006, 03:31 PM	#10
ProHandyman Cooling Neophyte Join Date: Jul 2005 Location: Upstate NY, USA Posts: 85	Re: Csp Mag Ii ??? Here is a retail magnum: FluidXP+ Magnum. It is of the 8 watt variety. not sure if they, or who else will be coming out with others, other then possibly DD. __________________ "There are certain times when one's knowledge has a limit. I suggest you watch and learn this time." A pessimist's blood type is always B-negative.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)