res, exacly.

right.
reservoir
what did i just say?

Ok, here´s som pictures of the reservoir:

http://img.photobucket.com/albums/v299/Skrue/Tank1.jpg

From top:

http://img.photobucket.com/albums/v299/Skrue/Tank2.jpg

Size comparison:

http://img.photobucket.com/albums/v299/Skrue/Tank3.jpg

The pump, a Maxi-Jet 1000, is a space-saving direct-mount to the reservoir, witch are made of 5mm plexi.
The filler-cap are made from a plastic coke-bottle, and glued to the top with cyanoacrylate.

Feel free to ask for more pictures and details! :)

looks good,
i still have a maxijet , not in use at the moment.
it's a decent pump, but mine vibrates way too much.
is that a temp sensor on the reservoir ?

Thanks! :)
Yes, the pump is ok in many ways, but, as you say, it vibrates a bit. So there´s some certain needs to isolate the pump (and res) a little extra. Some foam-pads do the trick!

Scrooge can i have some more pictures of the gpu block what temps are you getting of it and is the ram cooled on the other side.

Certainly!
Here´s some more pictures.
Soldering parts together:
http://img.photobucket.com/albums/v299/Skrue/G.jpg

Aligning the water-chamber:
http://img.photobucket.com/albums/v299/Skrue/J.jpg

Almost done:
http://img.photobucket.com/albums/v299/Skrue/I.jpg

Sealing is done by using silicone, in combination with 3mm screws.

RAM-cooling:
http://img.photobucket.com/albums/v299/Skrue/R.jpg

I used the original aluminium "cooler" on the opposite side, modified with some coolersinks glued to the aluminium.

Temps are pretty nice. Atm 31degr.C, with water-temp @ 27,8degr.C.
Stressing the GPU, results in 6 to 8degrees above water-temp, so the cooler seems to do the job. :)

Thanks Scrooge some great work there how does the card oc with the cooler do the ram sinks make any difference to the max speed the ram can run.

That's my water cooling. It aint much, but it's good enough. The most important issue for me was that every single component is inside the case. I ran out of space, so I had to replace neon with led fans. Though I suspected that with that much L-parts, the flow would be reduced a lot, but I was wrong. The flow is great.
http://mastermig.streznik.org/img/pic1.jpg
http://mastermig.streznik.org/img/pic2.jpg http://mastermig.streznik.org/img/pic3.jpg

MasterMiG, please resize your images.
ta.

this is my wc and i`m waiting the handmade water block for the 6600gt agp and some akasa noise killers..
the update with vga block after 10/12
http://img489.imageshack.us/img489/8807/154mg.th.jpg http://img41.imageshack.us/img41/5808/164jp.th.jpg http://img520.imageshack.us/img520/9816/38wb.th.jpg http://img514.imageshack.us/img514/4313/133cu.th.jpg http://img520.imageshack.us/img520/1470/53cs.th.jpg http://img41.imageshack.us/img41/4673/177fp.th.jpg http://img520.imageshack.us/img520/9163/89kq.th.jpg http://img520.imageshack.us/img520/595/110yl.th.jpg http://img520.imageshack.us/img520/297/123ol.th.jpg http://img41.imageshack.us/img41/3417/147wl.th.jpg

Epox 8rad3+ rev 3.2 bios by Merlin
AXDA1700DLT3C (JIUHB0 310 WPMW)
12,5X200@1.725v
2x512 geil
Albratron Trinity 6600gt 500/1100 bios By Me
wd 200 Ata
creative aydigy
pixelview playtv pro ultra
case modded by me and my dremel

WC parts 1/2 fittings loop
cpu block By eleven
gpu by eleven on his way
hydor l20
ford transit radiator 1/2 fittings modded

MasterMig, where does air come into your case?

Well, when we're here we might aswell post some pics :dome:

http://i21.photobucket.com/albums/b2..._/7423f873.jpg

Messy pic but you get the idea how its all connected...
http://i21.photobucket.com/albums/b265/Notten_/rut3.jpg

http://i21.photobucket.com/albums/b265/Notten_/top.jpg

http://i21.photobucket.com/albums/b265/Notten_/top1.jpg

http://i21.photobucket.com/albums/b2...n_/tophole.jpg

http://i21.photobucket.com/albums/b2...en_/front3.jpg

http://i21.photobucket.com/albums/b265/Notten_/rut5.jpg

As seen in Custom PC Issue 28... ;)

http://www.aslr97.dsl.pipex.com/dressed.jpg

All dressed up.

A few shots without the side panels.

http://www.cheebs.co.uk/leeum/Moondust/img187.jpg

http://www.cheebs.co.uk/leeum/Moondust/img188.jpg

http://www.cheebs.co.uk/leeum/Moondust/img189.jpg

http://www.cheebs.co.uk/leeum/Moondust/img190.jpg

http://www.cheebs.co.uk/leeum/Moondust/img191.jpg

http://www.cheebs.co.uk/leeum/Moondust/img192.jpg

http://www.cheebs.co.uk/leeum/Moondust/img193.jpg

http://www.cheebs.co.uk/leeum/Moondust/img194.jpg

:D

Re: Post your watercooled pictures
 

here is my rig-



http://imagesite.ihelix.net:85/YourFolder/inside2.jpg

Re: Post your watercooled pictures
 

here is my rig


http://imagesite.ihelix.net:85/tigger995/inside2.jpg

Biohazard V2
 

This is my new Biohazard pc and computer room
Cpu: athlon 64 4000+ M/B: Msi K8N Diamond Vga: Msi 7800 GTX Ram: 2 GB
H/D: 2x WD raptor Sata At 10000 rpm raid 0 Sound: SB X-fi elite Pro Cpu Block: DD TDX VGA: DD NV-7800 Chipset: DD Maze 4 Pump: DD D-5 All the fans are silenx And The temps are Idle 16c and full load Max 21c
For the friend that asks The amp is yamaha dsp-Z9 front Speakers Klipsch rb 75 rear rb 25 sub Rw 10

Re: Post your watercooled pictures
 

nice rig + monitor...

http://sc0rian.com/gallery/albums/My%20Pc/side2.jpg

http://sc0rian.com/gallery/albums/My%20Pc/top.jpg

http://sc0rian.com/gallery/albums/My%20Pc/wccube.jpg]

http://sc0rian.com/gallery/albums/My%20Pc/wccubeuv.jpg

Re: Post your watercooled pictures
 

hey its just hte begining

p4 650 3.4 stock
xfx geforce 6600gt 265ram @ 612/1.07
1 gig ram 533mhz
gigabyte motherboard 945p:nod:

the 3 blocks are home made with my drill press

and also the resevoir.

I am trying to get an affordable mill ,

Re: Post your watercooled pictures
 

has this thread died?

Re: Post your watercooled pictures
 

Here's my school project from this year. Yea I know the radiator is in a shite place :P and its not being cooled.. that's just temporary :P

Here's the picky:
http://www.ingomania.co.uk/james/mod...g/P1010018.JPG

Any comments..

Also no takin the piss out of the CPU cooler.. mainly because tech staff don't know much about it, I wanted to make something not made yet and it's easier to attach :P

But yea anyways, tell us what you think!

Re: Post your watercooled pictures
 

Well here is my new rig just got it done it was just a plain looking computer for about a year. But I had to change that. I have some pics let me know what you think go easy it's my first real build
http://photobucket.com/albums/i211/Bullmastiff135/?
My Computer Spec's
Water Cooling parts 3/8 ID 1/2 OD
Aqua Computer Aquagrati X850 VGA
Swiftech MCW30 SLI Chipset Water Block
Danger Den RBX CPU Block
Innovatek Konvekt-O-Matic MAXI Passive Radiator
Innovatek Konvektor MAXI Booster Kit
Swiftech MCRES-MICRO High-Flow Reservoir
Swiftech MCP655 12v Water Pump 317 GPH
Tygon R-3603 Tubing
Zalman Flow Indicator
Case ---
ANTEC PlusView 1000 AMG
ANTEC NeoHE 550 Watt ATX Power Supply
CPU
Intel Pentium 4 Extreme Edition 3.46 Gallatin 1066MHz FSB
Internal Clock 3802 MHz Temp Idle @34 C
GPU ---
ASUS Extreme AX850XT PE/2DHTV Video Card Idle @34 C
VGA Memory Clock 621 MHz
VGA Core Clock 574 MHz
Motherboard
ASUS P5AD2-E-Premium Motherboard Intel 925X/XE Chip Set LGA 775
Ram ---
CORSAIR XMS PRO (4 x 512MB) DDR2 pc 5400
Hardrives ---
2X0Raid Western Digital Raptor 74GB 10,000 RPM 8MB Serial ATA150
1 Maxtor 250 GB external
1 Maxtor 80 GB external
Sound ---
Creative Sound Blaster X-Fi Elite 7.1 Channels 24-bit 96KHz PCI Interface Sound Card
Logitech Z-5500 505 Watts 5.1 Speaker
ROMs ---
1 LiTE-ON Combo LTC-48161H
1 PIONEER DVD-RW DVR-105
Display ---
Sharp Widescreen 32" HDTV AQUOS
Fans & Lights ---
1 LOGISYS 120mm Sleeve Blue LED Light UV CCFL Dual Ring Fan
3 Aerocool UV 80MM Case Fan
2X4in UV cathodes
2X12in UV cathodes

Re: Post your watercooled pictures
 

A note to all; please try to keep your images to something reasonable in size, ok? ;)
(That means you, MasterMIG; I had enough time to post this, while your images were pulling up, and I'm on a fast connection at the office!)

Use a thumbnail creator if you have to. Here's a very good one that comes with a 30 day free trial:
http://www.neowise.com/etc/

If you need help creating the code to post thumbnails and link them to a bigger picture, ask a moderator; we'll show you how (until I sticky the darn instructions).

This message will self destruct in ...

Re: Biohazard V2
 

I really like your audio set up and monitor what models are all of those parts?

Re: Post your watercooled pictures
 

what brand and model is that monitor you have on photobucket?