Pro/Forums
Page 2 of 2 < 1 2
Show 30 post(s) from this thread on one page

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   Lil help with Iwaki Pump names :) (http://forums.procooling.com/vbb/showthread.php?t=10141)

Groth 07-31-2004 07:58 PM
Quote:
Originally Posted by jlrii
I think all non-grounded apliances in the us have polarized plugs. With them the frame of the apliance is attached to the nuetral.
If the chasis is tied to anything, it has to be tied to ground. Never neutral (think about what would happen if there was a break in the neutral wire in the cord/wall). A two prong plug implies electrical isolation of anything that can be touched.

N07 means 100V (and a Japanese plug, I think). It'll run a hair hot on standard US voltages.

pauldenton 07-31-2004 08:29 PM
Quote:
Originally Posted by Blackeagle
To each his own, but I'd suggest you get the MD20Z instead of the MD30 if noise is any concern to you. And the MD20Z will save you money on what it costs.
i believe the OP suffers from 50hz supply syndrome, so a 20RZ doesn't have a good curve....

Blackeagle 08-02-2004 02:38 PM
Quote:
Originally Posted by pauldenton
i believe the OP suffers from 50hz supply syndrome, so a 20RZ doesn't have a good curve....

Thanks for the response, was unaware of that.

pauldenton 08-02-2004 09:12 PM
Quote:
Originally Posted by pauldenton
i believe the OP suffers from 50hz supply syndrome, so a 20RZ doesn't have a good curve....
... which is a pity as there's a very reasonably priced (100V) one on ebay atm....
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=3831352089

naS 08-03-2004 06:00 AM
ill add anther fast Q here .. :)

as i have 50hz 220v connection at my house , wich motor will be better ?
i know i will lose some head for the american motor due to the 60-50hz diff , but i dunno much about the JAPANESE motor .. whats it freaquancy n stuff .. will it be better ?

Bobonit 08-03-2004 06:13 AM
It will run at 50 or 60 hz, that isn't a problem. However it is 100v. 220 would be too much for it.

naS 08-03-2004 09:39 AM
well , the volts aint much of a problem coz u can get an addaptor right ?
if it runs on 50HZ then with an addaptor is would work better ...

Butcher 08-03-2004 09:50 AM
Well japan runs either 50 or 60 Hz electricty depending which part of the country you're in, so I have no idea which Iwaki make their pumps for specifically, if either. Your best bet would be to mail them and ask.

Bobonit 08-03-2004 10:05 AM
Maybe I didn't say it properly. It will accept 50 and 60 hz. It will just run slower on 50.

pauldenton 08-03-2004 07:29 PM
Quote:
Originally Posted by Bobonit
Maybe I didn't say it properly. It will accept 50 and 60 hz. It will just run slower on 50.
exactly
if you look on page 6 of this PDF you'll see the performance curves on both 50HZ and 60HZ....
http://www.iwakipumps.jp/products_e/...f/md_w2003.pdf

Bobonit 08-03-2004 08:27 PM
Anyone know where to get replacement seals for an Iwaki MD-30RZ or MD-20RZ ?

pauldenton 08-09-2004 02:28 PM
Quote:
Originally Posted by naS
Hey , im about to buy an Iwaki MD-30RZ pump , and im having a hard time to figure what all thouse extra latters means , like i found this one: WP-IKMD30RLZT
Price $218.99
whats the L and the T stands for ?
also , if anyone know of a cheaper place that ships over the USA it would be nice.. coz i saw a long time ago one on ebay for ALOT cheaper...

thanks , nadav
if you're still looking, you could try persuading this guy to ship to you...
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=4317783220

one weighs 11lb if you want to estimate shipping...
http://www.usps.com/

naS 08-09-2004 03:23 PM
i saw an old link to one of his pump sells , talked to him if he have more and he placed thouse 3 pumps there , allready bought one thanks :)


All times are GMT -5. The time now is 09:39 PM.
Page 2 of 2 < 1 2
Show 30 post(s) from this thread on one page

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...