Sorry for my bad English I am french..........
thank you for the compliments I manufacture for forumeurs and also for the fun |
Great reservoirs everybody.
What type of material/glue do you use for putting plexi together? |
for PMMA=>PMMA i use chlorophorm
for PMMA =>PMMA XT i use epoxy adhesive 2 composents |
Quote:
|
pierreg60
how did you make that awsome copper reserivor? |
a tube of Ø 40mm and dish of copper of 3mm polishing and thats all
(google traduction sorry) |
"40mm OD tube of copper and some 3mm copper plate, soldered and polished" I think.
|
any other neat reserivors around?
|
Lo all, heres my custom side panel res, posted this up a while back...
http://www.asfs71.dsl.pipex.com/sideres1.jpg http://www.asfs71.dsl.pipex.com/sideres2.jpg http://www.asfs71.dsl.pipex.com/sideres3.jpg http://www.asfs71.dsl.pipex.com/sideres4.jpg |
I've got one that's a little out of the ordinary. I don't know if any of you have seen it before, I'm not too active on the various forums.
http://i5.photobucket.com/albums/y15...essedSmall.jpg I built the case from stainless steel tubing. The far side of the case is the reservoir and the near side is pressurized for distribution. The pump draws from the bottom of the res, pushes through the radiators and into the pressurized side. All the waterblocks pick up from bungs in the side and return back to the reservoir. I did this one about two years ago, and I'm halfway through the next iteration right now. |
Quote:
|
|
nice you make that ?
|
yes I have made that res :)
|
I'm lazy and just use a DD res with hole drilled in the threads for better filling action:
http://phaestus.procooling.com/radbox/finished4.jpg |
2 Attachment(s)
Not custom, but still high "bling factor.
Note that those are 1/2" barbs, rare for such a small res. I got it at: www.performance-pcs.com It works great on an Eheim 1048, but an Iwaki 20RZT overwhelms it. The air goes right through! The inner chamber is only 1-1/4" (D) X 4-3/4" (H). |
This 'Res' will contain a small Cistern made from a carburator needle and seet and float. And a Mistmaker. :)
[IMG]http://i7.photobucket.com/albums/y29...n/S4010428.jpg[/IMG] More pics here Will do a Proj Log whent the enclosure plate is cut and bent. :) |
Quote:
|
probably not the same place, but take a look at usplastic.com
Jon |
From my dads work :D:D
|
this place that's local to me called modern plastics sells it by the 6 foot lenth in any diameter in 1/4 inch diameter increments. In fact if you happen to have a plastics place around u pls go in and take a look there's a lot of cool stuff they sell.
|
mod could you please make this a sticky.
|
Quote:
Is this possible? |
yes it is technically feasible
|
Quote:
|
woo thanks pH, she's sticky!
|
Another one from me:
before I glued the top on: http://www.personal.psu.edu/mss26/ar...ath/38/126.jpg http://www.personal.psu.edu/mss26/ar...ath/38/129.jpg http://www.personal.psu.edu/mss26/ar...ath/38/130.jpg http://www.personal.psu.edu/mss26/ar...ath/38/133.jpg http://www.personal.psu.edu/mss26/ar...ath/38/205.jpg |
And lit up!
Reservior Lighting From the front: http://www.personal.psu.edu/mss26/ar...th/39.5/00.jpg Dark shot. Silver things are the plug and cool G1/4 returns. http://www.personal.psu.edu/mss26/ar...th/39.5/01.jpg Closeup of the backside of the fititngs: http://www.personal.psu.edu/mss26/ar...th/39.5/02.jpg The light source: http://www.personal.psu.edu/mss26/ar...th/39.5/03.jpg |
:drool: very sexy :)
|
1 Attachment(s)
res. for ddc
|
| All times are GMT -5. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...