Re: Snap 1000 Error
 

You are welcome and glad that everything has worked out so far. Try Linix, but I'm afraid that it may not work on this SnapOS file system. Use UFS Explorer Standard Edition to retrieve your files from the SnapOS HHD if you have to. This is a modified BSD OS with a UFS. (Unix File System). This is the only public tool I know that will allow you to mount and recover files.

Snap1000 has 32MB and the Snap1100 has 64MB of RAM.

I will try to answer as best as I can your questions at hand.

A;1.) What I have been told about the difference in Snap1000 v1 & v2 is that v1 has the OS loaded in to a onboard chip and therefore all you have to do is just change a drive and that SnapOS mfg version is installed on the HHD. The v2 you have to image the SnapOS file to the HHD and then format,etc,etc.. So, v1 is more user friendly.

A;2.)CS,MS, depends on the drive you are using. That's something you will have to play with. I have some drives that work with MS, then others work with CS and some work with either or. But the best would be to use MS on a single drive on Snap1000 to start.

A;3.) UFS Explorer Standard is for single drives UFS Explorer Pro is for single and raid recovery.

A;4.) DCC1234 is here like everybody else I guess...for help. The forum is open to all to participate.

Brain food on the file system if you would like to understand a little about it.

http://www.answers.com/topic/unix-file-system

Here is a link and file to use at the bottom if you would like to explore your snapos HHD. This will not allow you to recover anything , but it will let you know what is on the drive. Check it out. It's a good tool with good SnapOS info.

http://www.dtidata.com/resourcecente...or-snap-os-4x/


Share and share a like,

bitor