maybe it seems out of topic....

but does anyone here knows the dimensions of a northwood proc die without its heat spreader (naked)

Got an Ati AIW 9700 Pro and ripped the HS/Fan off of it and broke out my calipers... :D

I'm still adding dimensions and keepouts for a water cooling solution... The "Keep Out" areas are VERY tall... ¼" or so... the smaller orange colored boxes are taller components that match the height of the GPU Shim from the board... these would need recesses milled into a block to clear due to the lower height of the RAM. RAM and GPUs are represented on the front view by the red squares.

I'll post the front again when I get dimensions on it...

Edit: Added a picture overlay... this is how I verified my measurements and actual component locations. :p

i maded a sapphire 9700np model in truespace3, its a bit similar to the above one, i used it to do a few designs for a gpu block.

Here is the front and edge of the Ati All-in-wonder 9700 Pro... haven't got the back done with measurements yet... The smaller "Keep Out" areas are the same height as the GPU shim as noted. :D

Note: I had to use .PNG format to save space... I can export to .DXF and .DWG or provide the original Visio drawings.

MMZ_TimeLord: do you know if regular 9700's have the same positioned components as the aiw?

No I do not... can't confirm it as I do not have a regular 9700 Pro... :cry:

All I can say is if anyone DOES have one... get out a pair of calipers and start measuring against my drawings.

hell yeah! :D

So how do you mount a waterblock if you want it big enough to cool all the components? Do you need 1 on each side and then press them together?

Check here ... I've designed a cooling solution for my All-in-Wonder 9700 Pro.

This is just my preference. You can get away with only cooling the GPU if the original card only had a HS/Fan on the GPU and no heatsinks on the RAM.

can someone who has a dual opteron mobo confirm this sizes. its a MSI K8T Master 2 FAR Mobo. dual opteron thanks in advance

how to make a 1:1 scale drawing - print and then drill the holes?

so some opteronboards uses the same measures as the older slotA. wierd.

For some strange (really, really strange) reason, MSI chose to ignore AMD specification and give the K8T-Master2-FAR P4-style heatsink retention (which voids the warranty for retail processors).

Check the socket-423 spacing in the picture at the beginning of the thread.

thanks guys so i can use the socket 423? hehe thanks a lot guys

try a cad program.
I use ACad to create an acurate template for shrowds.

id like to know what is the position of the mounting hole from the center of the core

That information starts at post #18 of this thread (first page).

Does anyone have a layout picture of the GeForce FX5900XT with measurements? The memory layout is pretty diffrent from the FX59xxUltra cards...

Here you see the memorylayout..
http://www.gamepc.com/images/labs/re...-profileSM.jpg

Gainward FX PowerPack! Ultra/1100XT TV-DVI ...the card i have.
http://www.gainward.se/pictures/FX59...vi_large_2.jpg

is the distance from the middel off the screw hole or on the side of it on the socket 478 ? in realy wondering about it ..


-diablito-

from the side

In mm

99% sure its correct

Edit: thanks JFettig, that helps alot :)

NO, those dimentions are center to center.


Jon

I updated the dimentions for the video card holes, They are in 'standard' and metric.

Included is a picture(jpg) and a zipped drawing(dxf)

Enjoy:)

Jon

This may have been said already, what size holes are used in 9700 and nf7-s for mounting the gpu and chipset heatsinks? I think i measured them at 2/3mm but lost the paper I wrote it on. Also for 2/3mm which size BA studding and tap will I need?
Also Id like to know the same for hdd mounting holes.

They would be just over 3mm, I measured them to be like 1/8"


Jon

here is 9800pro from ATI measured to say +/- .1mm
Oh yea the measurements are in MM if you need inch say so i can convert them all in 2 second

yea you guessed it 1 9800pro waterblock coming up

anyone have distaces for the socket 939/940 holes ? the one with the 2 holes .. ?

Try the 7th post in this thread:) says A64 on the pic so i guess thats the same as 940/939 is it not?

i saw that one .. its the socket itself but not the mounting holes , i also searched the AMD pdfs on thouse sockets , still no mounting holes distaces

edit: oh lol i've just figured out its for that black crap to mount the HSFs on it .. it look like the socket itself but i didnt understood howcome its so big :p

Can this Intel P4 Socket478 dimensions be considered as close to being exact?
Please correct the dimensions.
Thanks:)

P.S. Oh yes I have the dimensions w/c pHaestus posted, but it seems to be off a bit and there is no info on where is the location of the P4 heatspeader or CPU itself.