Now I have cleand it it up it looks very spartan. Behind this nest of fans is two black ice micro (with 4x80mm) and they cool things very nicely indeed... Quite chuffed with them actually... even though i haven't actually SEEN them in months.

NOTE: The fan grill without a fan is to aide ventilation... ok ok I had a spare grill and edging lieing around and I was bored... looks better though :)

And finally the airtrap/res thing. Since there is a thread elsewhere about the perfect airtrap I edited this picy to show what it is clearer.

The entire systems clears up in a few minuites ... that is including the mass of tiny bubbles the pump creates when I'm filling it.

And there you are.. finito.

Very nice rig! I like that case, which one is it?

Erm... if you are talking to me then thanks :D

And see my (finally got round to doing one) sig.

i need parts, tools and labour -
anyone up to flying over and making my case better (involves making wc setup and overclocking too) :dome:

http://68.64.239.182:8000/pictures/m...s/DSCF0057.jpg

But that's just stage 1 testing... notice no ram or power hooked up. After the res died (alcohol cracked the plexi top/bottom) I had to rip everything back apart. Delayed for another month or so until I get some more money or break down and use my CC to buy some stuff for it.

is the case a intel sc5000 server chassis ?

it looks like the one i have and keep thinking how much room there is at the front for water cooling stuff.

You hit the nail on the head. it's a hudson (SC5000) chassis all right. things are a bit cramped w\ that heatercore b/c its too wide for the top drive bays, and it's also pretty tall with the shroud. if i had an HC that only took a single 120 instead of 2, there would be lots more breathing room, but as it stands in my testing it cools like a champ... but testing = suckage due to breakdown and corrosion problems b/c im dumb ;) water idles 2*C of ambient w\ fans on low.

my system
http://www.xtremesystems.org/forums/...&postid=201700
http://www.xtremesystems.org/forums/...&postid=201698
http://www.xtremesystems.org/forums/...&postid=201697
dfi lanparty nforce2
amd xp 2600running@2486
kingston pc3500 2x256 hyperx
ati 9700 with vmods
dangerden cpu,gpu,northbridge waterblocks
315ehime waterpump
innovatek res.
lian-li full tower pc71
looking for a mem. mod for the motherboard to let me run volts above 2.7.

here is mine

And here is the waterblock that I use, DYI is the only way to go!!!

Rig 1

http://www.btinternet.com/~mike.timb...er/rig1new.jpg

PC-60, 8RDA+, XP1700B at 2400MHz, SlitEdge, Gold BIX, BeCooling Pump/Res.

Rig 2

http://www.btinternet.com/~mike.timb...ater/rig2a.jpg

ECS K7S5A, XP2100b at 2278MHz (in-socket wire-trick), Little River White Water #095, Chevette Core, hand-made shroud, 1250.

http://www.jacksongamingleague.com/u...nker/lian1.jpg

http://www.jacksongamingleague.com/u...nker/lian2.jpg


Lian-Li PC71
AMD Athlon XP 2500 Barton @ 2.3GHz (can do 2.4 but not from cold boot, probably due to my mobo not being able to more than 1.85v (currently 200x11.5)

Corsair XMS PC2700 Low Latency
Asus A7N8X Deluxe Rev. 1.04
Swiftech MCW5000 block
Danner 250gph pump
BayRes
BIX Rad
120gig 8mb WD HDD
Radeon 9700 128MB
blah, blah.

CPU 99*F idle, 102*F load
Case 73*F idle, 77*F load, 72*F ambient.

http://www.uploadit.org/files/210903-ss.jpg

I spent alot of time working on the rad at the top. I cut it out with a jigsaw.

http://www.aqto54.dsl.pipex.com/water/23.jpg


This is it with blue light

http://www.aqto54.dsl.pipex.com/pc.jpg

Heres a great big pic a great 1

Here is a 600kb file, a very very good pic

Will get apic soon of both lights

:p

is that mustard in your tubing :p

No... I think he's pleased to see you. ;P

*Runs for the hills*

lol:cry:

I know. I am changing the colour tonight!:D

naw, i was just joking. yellow looks good w/ your black case and yellow mobo and it's pretty unique.

hehe thnxs mate:D

And my 90% bend

http://www.aqto54.dsl.pipex.com/water/35.jpg

When I was building it then:p

this is my baby
 

looks great

hehe thnxs mate:D

Sry to bump up this thread but had to comment on Jackal's rig, that guy has pretty much done something I'm looking forward to do as soon as I get all the parts gathered from here and there =)... and BTW Jackal, you've got mail...

(yes, this is my first post here, I'm more of a reading than posting type=)

Nice setup too all. Alot of big freakz here well it is a procooling forum so what do ya expect?