Thanks for your efforts Razor6

Do you happen to have the data for these curves? or is it just an image? If so would you be able to attach it please. I find Datathief annoying.

Thanks

The MCP350 is on the Swiftech site? Where exactly?
I just visited their site, and there's no mention of this product.

http://swiftnets.com/products/mcp350.asp
Someone posted it in the DDC thread

Thank you Lolito_fr, had missed that.

jeez, and I have missed it too

Attached are the raw values for the graph. You'll need to change the extension to xls because the forum doesn't accept that extension.

Thanks Heaps. Saves me some tedium.

:)

i made a graph comparing the ddc and eheim 1048.

http://img.photobucket.com/albums/v3...red/chart2.jpg

did it by taking eheim's p/q chart and stretching/skewing over the swiftech's ddc chart. to read it, the swiftech chart is lpm in incriments of one, by head in meters, incriments of .5. the eheim chart is gph, incs of 20, and feet, incs of 1. sorry i'm such a lazy bastard that i cant compute each point and render a cleaner graph, but this works if you have the patience to figure it out.

New pumps, new graph, added the D5 and a simple version of the C-Systems MAG based on what D-TEK says.

http://forums.procooling.com/vbb/att...tid=4605&stc=1

Good job! Any chance of making the new data available?

I took the earlier set of data available and added some for the RD30@18V, 20PIZ, and BlueLine-800 -- eyeballed from Cathar's post and mfg's datasheets. Rename the file from pumpdata.txt to pumpdata.xls.

The data.

^ Looks about right, using DD or D-Tek 1/2" tubing adaptor.

Just note, our data is based on 12.5-13V, not 12V.

Most power supplies run at 12.6 volts, as we tested.

I will do a series MAG test this weekend, using DD's fitting and post results.

Dave

** Note 12.6 volts is average of 10 different power supplies we tested. It was suggested to me that I do not indicate all supplies run above 12V, as it can be mis-leading, which is the last thing we want.

RoboTech made these charts via calibrated test equipment.
http://www.systemcooling.com/swiftech_mcp655-01.html

http://www.systemcooling.com/images/...55/image14.gif

http://www.systemcooling.com/images/...image17big.gif

http://www.systemcooling.com/images/...image22big.gif

http://www.systemcooling.com/images/...55/image23.gif

Does anyone here think a Magnum 350 aquarium pump would be useful? I can't find any meaningful data on it, but I have one in new condition. The rotor is magnetically driven and I believe the filter housing is approimately 1.25 qt. Thanks for any info!

second part of Cooling-Masters pump comparsion.
>link(googlish)<
they have too much free time :)

edit: copy&paste the URL to a new window if u want the translated version.