Re: Snap OS 3.4.805, anyone?
 

Here's what I have in the settings:

TCP/IP
Server IP Address 10.0.1.202
Subnet Mask 255.255.255.0
Default Gateway 10.0.1.1
WINS IP Address (None)


Microsoft Networking
Enable Microsoft Networking Yes
Enable NetBIOS over: TCP/IP and NetBEUI
Workgroup or Domain Workgroup
Workgroup/Domain Name WORKGROUP


Advanced Microsoft Networking
Enable Master Browser Yes
Enable Opportunistic Locking Yes
Enable NT SMBs No
WINS Scope (None)
Server Comment (None)


Novell Networking
Enable Novell Networking No


Apple Networking
Enable Apple Networking No


UNIX NFS
Enable NFS Yes


Web
Enable Web Services for All Users Yes

I assume that by "UFS" you mean the Unix NFS filesystem support. I have had that enabled since the beginning.

Wook

Re: Snap OS 3.4.805, anyone?
 

How come you have the apple networking turned off ???
and NT SMB's off.

You are using apples.......

yes on NFS.

I would change the "Workgroup" to match your current Group.

Re: Snap OS 3.4.805, anyone?
 

Does anyone have SnapOS v3.4.805 or v4.x?
Any help would be greatly appreciated. ssli125@gmail.com

Re: Snap OS 3.4.805, anyone?
 

ssli, what are you working on ?

Re: Snap OS 3.4.805, anyone?
 

I have SNAP2000 v3.4.803, BIOS2.xx, Hardware 2.xx

Re: Snap OS 3.4.805, anyone?
 

I could be wrong, but I think he wanted to know what you were doing that you maybe need v4 OS instead of v3 OS or vice versa.

Re: Snap OS 3.4.805, anyone?
 

Hi:

Could someone e-mail me 3.4.805? I have a 2000 and want to expand the drives beyond the 2x20GB that it came with. If it is available from someone, it would be great if the .SUP could be e-mailed to dreamignition@gmail.com

THANK YOU!

Re: Snap OS 3.4.805, anyone?
 

Some early models want upgrade. Post your 2000 vitals.

Re: Snap OS 3.4.805, anyone?
 

Ijust bought a 160gig HD and would like to be able to use all of it but my Snap 1000 only see 132, from what i read i am to late in requesting Quantum to give me the free upgrade, if in any way it could find it's way in to my email box it would be great
alainm@techie.com

Model Software Hardware Server # BIOS
1000 series 3.4.772 (US) 2.0.2 167xxx 3.4.758

Re: Snap OS 3.4.805, anyone?
 

How big are the upgrade files...looking for 3.4.805


Model 2000 series
Software 3.4.772 (US)
Hardware 2.0.0
Server # 50498
BIOS 2.0.282

Re: Snap OS 3.4.805, anyone?
 

Quantum aint owned the snap server part for a while.

Re: Snap OS 3.4.805, anyone?
 

Well half a week of working on my Snap 2000 still hasn't resulted in a bigger HD. I started with 2x6GB and wanted to at least swap in a Hitachi 40GB drive. First PcConnection sent me an ATA 133 drive, which was listed as 100 on their site. So I had to download the Hitachi HD utility and reset it to 100.

Then I blew the Snap fuse - easily replaced at the local Radio Shack for their last pack of 2 amp fuses. I've now tried every combination of slave/master, one drive, both drives, left/right, up/now. The new drive still isn't recognized by the Snap OS.

So I'm down to the Snap OS. I have v 3.1.618 and bios 1.2.180. I'm figuring I need to upload to the mythical 3.4.803/805. Can some kind soul please let me know where I can obtain the correct .sup file or e-mail it to me n5 at mwpsoft.com.

I've read through all the upgrade postings here and unless I'm missing something. I don't know what else to try after doing the OS upgrade.

Any other help would be appreciated. I love my Snap and I'm not ready to replace it with something else.

Thanks.
Nigel

Snap 2000
Rebooted only 10 times since 1998 (normal use)
Only one crash

Re: Snap OS 3.4.805, anyone?
 

You have a version 1 2000. It does not support LBA48bit. So the max will be < 137gig. V3 supports HD up to 137gig. This old unit only has a ATA66 interface, 40 conductor cable. It will not work with a EIDE interface.

To upgrade the HD's, config the unit for JBOD. Once complete, shutdown and install 2 new drives. The drives should be set M/S, with the master on the end of cable. The drives must be clean, NO UNIX file structure. Restart the unit. The Disk LED should stay on for some time. It takes 10 min for the system to copied from flashram to HD. After that time you should be able to connect and monitor the disk formating status.

As far as fuse blowing it was due to the RF shield at the drives power connectors. That is where I had the problem.

Re: Snap OS 3.4.805, anyone?
 

Tried all of this. I only want to install a 40GB drive so the <137 problem shouldn't even be present. The cabling is all OK, and I've tried all manner of M/s combinations. I've also switched between 15 and 16 head settings. Good tip on ATA66, I'll reconnect the Hitachi utility and reset to that level. Fingers crossed.

I have been searching for my original v3 .sup and bios upgrade files. Can't find them. I located the DELL 3.4 versions, but I'm not going to try a non-OEM upgrade until I know I have the original Snap version to drop back to.

Thanks for the help, it's much appreciated.

Nigel

Re: Snap OS 3.4.805, anyone?
 

Generally Hatichi dirves have never been a problem. Try resetting the drives back to default. While you have it connected to the pc, zero out the MBR table.

You can use dd to copy the old drive to the new. Only need the first 25 meg of the drive. Instructions are in the wiki section of the forum.

If things are not working correctly yo do not want to attempt a OS upgrade.

Re: Snap OS 3.4.805, anyone?
 

I just acquired a Snap Server 4000 and I want to upgrade the drives from the original 4x30gb hard drives to 4x250gb hard drives. Here is the info from it

Software : 2.3.417
Hardware : 2.0.1
Bios : 2.0.282

Can the drives in it be upgraded? I know I will need to upgrade the Snap OS to get the 48bit LBA support, but I can't make heads or tails of finding the files on the snap website. Could someone possibly email me the files and some reference on how to do the upgrades if its even possible? My email address is
zakosekjohn@gmail.com

Thanks!

Re: Snap OS 3.4.805, anyone?
 

In the end I gave up, I wasted too many days going through all the permutations of getting my Snap 2000 to upgrade. But it was a good opportunity to see inside my box, clean it out (wow, all that dust!) and check the fan out. I was very impressed with how good the components all look considering it is now over 8 years old!

I think in the end the biggest problem was that it was a version 1.1 piece of hardware. It still says Meridian on the casing ($1995 when I bought it.) The only thing I didn't attempt was to cap the hard drive to 32GB and see if the Bios suffered from the old 33.8gig limitation.

I still would like a copy of the latest 3.4 OS upgrade, and related Assist and Bios upgrades. If anyone can shoot them over to me it would be much appreciated.

Thanks again for your help.

Nigel (n5 at mwpsoft.com)

2000 series
OS: 3.1.618 (US)
Hardware: 1.1.0
Bios: 1.2.180

Re: Snap OS 3.4.805, anyone?
 

These Ealry Snaps DO NOT LIKE EIDE DRIVES. Many have had a suscesfull upgrades, with no problem. Seagates and Hatichi drives have been of the least trouble. Once you get the flashram upgraded with v3, every thing works good.

Re: Snap OS 3.4.805, anyone?
 

Hi!

I just acquired a Snap Server M4100 with an older 3.4.7X version of the firmware. I understand that there is a 3.4.80X version .sup available. I would surely like to update my exisiting unit to the latest non-4.X version. Please email me at tim@lestercentral.com if you have a copy.

I have another existing Dell Powervault 705N with 3.4.803 on it, but I don't have the .sup file.

Thanks in advance,
Tim

Re: Snap OS 3.4.805, anyone?
 

Hey all! At the risk of sounding redundant, I'm looing for the SnapOS v3.4.805. Just acquired my 2000 and both drives are dead (actually they pretty much whine and knock loudly...) but I can access the management GUI with no problems. Removed the old drives and put in 2x 40GB and it works great. I would like to throw in some 200 or 300 GB drives but I distilled that the .803 would not detect >137. I found a bunch of great information but nowhere to download the update.

Thanks in advance if anyone's got it!


Model 2000 series
Software 3.4.803 (US)
Hardware 2.0.0
Server # 38250
BIOS 2.0.252

Re: Snap OS 3.4.805, anyone?
 

I have heard from others that the 803 version is avaliable from Adaptec web site, the new owners of SnapAppliance.

Re: Snap OS 3.4.805, anyone?
 

can someone send me the new version. 3.4.805. I got a 4100 second hand, having some file problems, and adaptec support says it is fixed in that version. mstiger@gmail.com Thanks in advance

Re: Snap OS 3.4.805, anyone?
 

It could also be a hrdware limitation, but i think the V2's are fine....

Re: Snap OS 3.4.805, anyone?
 

Jilaman, What kind of problems are you having with the 4100. Because Snap never acknowledge that they have a 805 version. 805 only add LBA 48 support. Which does not apply to the 4100.

Re: Snap OS 3.4.805, anyone?
 

I think it actually has come down to a BAD drive. I can do invidual disks, and all 4 run and format fine.. As soon as I go to create a RAID 5 Disk1 fails.


SO I think it is a bad drive.