Thermochill 120.2 or 120.3 for P4EE?
 

Hi there

Due to the arrangement I am setting up, a heater core won't really do for this situation so I'm considering either a 120.2 or 120.3 Thermochill (or I guess the BI equivalent of the 2) to cool a P4EE. I want top notch performance for oc'ing, but obviously due to space, don't want to get more than needed.

One loop to cool the cpu, 1/2" using the MCP650 pump and the 6002A block.

Opinions? will the 3 make a reasonable improvement of the 2 fan rad such that I should make the space available for it?

Thank you!

heatercore

there are at least two with the width you are concerned about

it is up to you to find it.

save $60

Advantage to the .3 is you can get away with quieter fans. Advantage to the .2 is it's cheaper and probably easier to fit.

If you have the space and $$ for the bigger one then why not?

Exactly my thoughts! :evilaugh:

how is the BIX2 compering to the .2 , .3 ? :)

should be in the same ballpark as the 120.2 I would think

the only place i know thats selling the thermochills in US is dangerden. and the .3 is only ~$20 more then the .2. so i guess if you have the space and the $20 to spare then that would be the better choice.

Thank you all :)