Pro/Forums - Nuclear reactor case mod???

Pro/Forums (http://forums.procooling.com/vbb/index.php)

- Hardware and Case Mod's (http://forums.procooling.com/vbb/forumdisplay.php?f=20)

- - Nuclear reactor case mod??? (http://forums.procooling.com/vbb/showthread.php?t=10494)

Nuclear reactor case mod???

My friend had some great ideas for a case mod (I'm bad at visualising things ...)

one of them involves sticking a big red button on top of the case as the power button ... it's one of those with a door over it ...

question is: Where can I buy one?

also, anyone know where to get that label gun that punches out white letters on a black tape which is about 1/4" wide??? and what is the proper name of the thing???

thanks a lot, man ... the search for the red button continues ...

Are you looking for the military type switch with a cover? I know we've linked to it before.

Otherwise if it's just a big a** button, then it's just a big cover on top of a small switch, which you can make yourself.

These are cool. http://www.12vp.com/Item_Coyote_Table_Page.htm They come with LED's in the top of the switch. May not be 100% what your looking for though.

I havent found a "pushbutton" with a cover but here are a couple of links to some interesting types of "push" buttons
http://www.ab.com/industrialcontrols.../pbhome_lg.jpg
http://www.geindustrial.com/products...es/DEA-259.pdf

personally I can see an application for the emergency stop type!

sorry guys, for not replying, but I found what I was looking for ...

the button is momentary ON, the actual mushroom head is 60mm in diameter ...

here's the link: http://www.asi-interconnect.com/prod..._head/plastic/

the part number is: 8 LP2T B6164, they also have a metalic version which I don't think I want to get (I think black plastic would look better), the part for metalic version is: 8 LM2T B6164

As for the cover, I am looking for something similar to this: http://www.michaelselectric.com/shop...ail.asp?id=242

this is what it looks like when installed: http://www.michaelselectric.com/shop...ail.asp?id=243

the cover is 70USD which I don't think is worth that much money ...

as for the military switches, I was thinking of getting 4 of them to control lights ...

ASCII layout:

Code:

this is the top of the case ...

 _________

|         |

|         |  2x120mm Radiator here ... if/when I get WC ...

|         |

|         |

|         |

|         |

|         |

|    __   |

|   [__] <--- Power button

|         |

| 0 0 0 0 <--- 4 military switches to control various lights ...

|_________|

I was also thinking of making the reset button a keylock and put it where my current power button is, this is the lock I want to use http://www.jameco.com/webapp/wcs/sto...oductId=119903

NOW ... here comes the tricky part ... this is where I need help of electrical engineers and such ...
I want to have 3 4" cathodes on each side of my front panel underneath it and dremel "slits" of where lights will shine through ... I need/want a circuit that will slowly raise the voltage on the bottom lamps (it will look like a rising beam if you know what I mean), then as soon as the bottom ones light completely up, have the same done to the middle lamps, and then the third ... the bottom 2 on each side will be green and the top ones will be red ... sort of like a status "bar" ... and if possible to have a "timer" (can be on a PCB or anywhere, doesn't need to be easy adjustible), maybe also have a "buzzer" that will "buzz" 3 times when the lights are completely on ... (maybe stick a strobe light inside?)

BTW, my case is Lian-Li PC75 ...

another thing that I want to find are rheostat knobs that looks like valve handles (the kinda round red ones ...)