Pro/Forums - Silverprop fusion/polarflo TT gpu blocks?

Pro/Forums (http://forums.procooling.com/vbb/index.php)

- General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)

- - Silverprop fusion/polarflo TT gpu blocks? (http://forums.procooling.com/vbb/showthread.php?t=10930)

zee bee

11-25-2004 04:11 PM

Silverprop fusion/polarflo TT gpu blocks?

Hey guys, looking for a good gpu block that is NOT danger den.

Anyone use either of these blocks? How would you rate them in terms of flow restriction? (low/med/high/very high/etc)

Just looking for some feedback on these blocks thx!

zee bee

11-27-2004 12:31 AM

Ok whatever I am just going to get the Silverprop block :\

Delirious

11-27-2004 04:43 PM

I have the polarflo SF gpu block, and have to say the inside is poorly designed. So i ordered as silverprop to replace it, havent recieved it yet though.

ditchpig

11-27-2004 06:54 PM

Get the Fusion. I couldn't be happier with my HL! The HL clears ramsinks and still has a lower profile than many GPU blocks. I only lost 1 PCI slot.

Cranky

11-27-2004 08:37 PM

i like the swifty mcw50 myself..

zee bee

11-28-2004 01:18 AM

Thanks for the suggestions, I am getting the silverprop. Can anyone recommend one of their cpu waterblocks too? i want the whitewater but it is not in stock anywhere. Using a system w/ 1/2" ID tubing

BlackStealth

11-28-2004 03:29 AM

Quote:

Originally Posted by ditchpig

Get the Fusion. I couldn't be happier with my HL! The HL clears ramsinks and still has a lower profile than many GPU blocks. I only lost 1 PCI slot.

I also have the SilverProp Fusion HL installed on my 9800Pro, it one of the best GPU blocks out there. I think I over tightened it on my 9800XT and the core is damaged. What technique did you use to install it? I personally used the screw and nut.
Just to avoid the same mistake again :cry:
Thanks

zee bee

11-28-2004 04:05 AM

^Ouch!!!!^

BlackStealth

12-02-2004 03:27 AM

Quote:

Originally Posted by zee bee

^Ouch!!!!^

Yeah It Hurts ! But what could I do , Life just goes on......
So no advice on the installation?

Pooky

12-02-2004 01:05 PM

I have a Silverprop Cyclone something (not sure which model it is, it's for P4 and has a red top with a copper base.) I bought it from Criticool off eBay many months ago. I'm not sure what the inside design is, as I haven't taken it apart. My 6800 will have a Swiffy MCW50 soon. Both are non DD solutions :)

All times are GMT -5. The time now is 05:55 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...