2 setup choices:
 

CPU block:
Cascade SS (can buy now)
Storm G4 (will have to wait for next batch)

Pump:
Iwaki MD12-r (weak one right?)
50Z (need to import... none in UK anymore)

Rad:
JPI Performance XLR120/Scoop2.0 (Special 5/8" version)
Thermochill 120.2

Tubing:
Not sure, clearflex or tygon... I hear clearflex is alright and I can get it fairly cheaply imported with pump.

GPU block:
Not sure, not sure... its for an X850XT...

Case is a Lian-Li pc-61. I am very tempted by the JPI but its big and going to take alot of case space (I want it all in one... no external boxes)

Cheers!

bump! give me an answer!

Umm.... patience young jedi. It appears that you have more money than patience. Perhaps we could work out a trade?

Those are all reasonable choices, as far as I can see. Whether you get Cascade SS vs. Storm G4 is not going to make a lot of difference in your overclock, I think.

The pumps I don't know much about. I use the MCP-650/D4 pump.

Rad... I use a heatercore in one system (a home-made case) and a DangerDen 3-fan rad for the other.

Tubing should be fine for either choice. Tygon might be a bit more flexible, but it's going to be hard to tell.

GPU block for an X850XT? I have no idea. Send me a card to use, and I'll find a block for it. :D

As for the case, I can't answer that easily. I made my own 24" cube because I didn't like the cases out there (and I like making things).

dym an MD-15R? (there is no md12...)

might be better off with one of these as you want to keep it all in the box...
http://www.overclock.co.uk/customer/...roductid=18366
used to be plenty xlr/scoops put in pc61s when they were in production

http://www.overclock.co.uk/customer/...roductid=18154

I dont think there is space for a scoop vertically so do you mean putting it uptop (im guessing)