Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Water Block Design / Construction (http://forums.procooling.com/vbb/forumdisplay.php?f=37)
-   -   CPU and NB size? (http://forums.procooling.com/vbb/showthread.php?t=11624)

[Snowman] 04-26-2005 04:13 AM
CPU and NB size?
 
im am going to make my first water coold system, and i dont know how big a CPU an NB is cus i have ondly a 430*60*10mm of copper.

tex707 04-26-2005 07:24 AM
Quote:
Originally Posted by [Snowman]
im am going to make my first water coold system, and i dont know how big a CPU an NB is cus i have ondly a 430*60*10mm of copper.

Which CPU would that be...which motherboard?

[Snowman] 04-26-2005 09:02 AM
AMD 64 and P4
the NB dosent have to be exakt just +-5mm

maxSaleen 04-26-2005 07:05 PM
Which chipset for the NB? Mounting styles and sizes vary radically from chipset to chipset and even within a chipset family.

FL3JM 04-27-2005 07:18 AM
If you have the motherboard allready, then just take the cooling off and you will see exactly how big the NB is and what type of mounting system there is (usually just two holes), and you can take measurements and stuff really easy.

Your chunk of copper is enough for NB, CPU and GF. Thats quite a large chunk you got, 43cm long, 6cm wide and 1cm thick!

[Snowman] 04-27-2005 09:53 AM
Quote:
Originally Posted by FL3JM
If you have the motherboard allready, then just take the cooling off and you will see exactly how big the NB is and what type of mounting system there is (usually just two holes), and you can take measurements and stuff really easy.

Your chunk of copper is enough for NB, CPU and GF. Thats quite a large chunk you got, 43cm long, 6cm wide and 1cm thick!
ok. butt i dont have the motherboard and CPU and i dont know if i am going to have a P4 ore AMD64. So i have to make the WB so its fitts the lages CPU.
im am going to "melt" the copper so its 2cm thick so i have 15mm fins :D

Long Haired Git 04-27-2005 09:02 PM
http://www.geocities.com/lh_git/wckb/holes.html

(if anyone has more modern diagrams lemme know)

Bloody_Sorcerer 04-29-2005 06:14 PM
don't have a diagram but i know that A64 mounting holes are exactly 90mm apart.


All times are GMT -5. The time now is 04:41 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...