Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   FS/FT Forum (http://forums.procooling.com/vbb/forumdisplay.php?f=10)
-   -   wtb (http://forums.procooling.com/vbb/showthread.php?t=11708)

tong 05-13-2005 01:22 AM

wtb
 
looking for a northbridge water block and a dc waterpump. Funds will be paypal. the fittings on both must be 3/8 to combine with my other blocks. will even take a Do It Yourself block if it looks good. Thanks guys. If i get this i can finaly go water YAY. oh a cylindrical reservoir (temporary till i get my bulelt casing in) too. looking to spend about 70 to 80 bux US.

jman1310 05-13-2005 02:06 AM

2 Attachment(s)
i can make a custom cylindrical res for you
it can be as long a 2' (wouldn't go less than 3") and will be made of 1.75" ID acylic tube
i used a 3/4 fitting and a 1/2 fitting and a 3/4 fill port on top
i might have to buy a new tap to cut threads for 3/8 - i will have to check
$40 for the res
in the 2nd photo, you can see the devider between the in and out which speeds the bleeding process
i also have a polar flow NB block (anodized AL) you can have this if you buy the res

tong 05-13-2005 10:15 AM

we will defenately talk. short on time right now bu i'll hit u up

Delirious 05-13-2005 11:37 AM

I have the the danger den z-chip nb block just sitting around, never really used it. Its setup for a p4 board.

tong 05-13-2005 01:28 PM

oh nice the z one, can it be setup for an nforce chipset? That's a nice block. :drool:

Ok jman1310, any chance of having one made with like a 2 1/4 to 3 inch id? fill port on top and the two lines on the side? would have to be a total of like 6 to 8 inches tall. Thanks

Delirious 05-13-2005 09:30 PM

It the first chipset block danger den made. You would probably have to call them for a replacement top that would work with it. In the end u would be better getting the newer maze4 chipset block. IMHO i think water cooling the nb is a waste of time. Your better of with the swiftech hs.

tong 05-15-2005 01:01 PM

jman1310 hit me up, contact info in my profile. Thanks man.

tong 05-22-2005 12:11 PM

Ok. found the pump used mcp-600 and made a reservoir--which was neet to do.... still need a nb cooler got about $20 bux left so

/me gets down on knees and cries like a little school girl

pls somone have a nb chipset block for an amd nforce 2 chipset with 3/8 fittings PLS

Vertigo Acid 05-22-2005 08:32 PM

I've got the AMD top for a Z-chip for sale in my thread, $10 shipped, LMK if you're interested, pizowned@gmail.com. BTW you can't get them from DD anymore, not listed on their store, I had a helluva time getting the intel top for mine.


All times are GMT -5. The time now is 10:19 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...