Teach me the ways of OC :-)
 

I currently would like my current system to OC to about 600 (if not the normal)... Heres What i mean:

Here are my system specs:
K6/2+ 500 mhz @ 450
PC-66 64 megs of ram (PNY)
15 gig maxtor 7200 RPM diamond max plus
AOpen AX59 pro with latest bios
Voodoo Banshee AGP

Why cant i get her higher than 450mhz? im already using the 6 multiplyer, its at a 2.2v. and at a 95mhz FSB... what can i try to get it higher?!?!?!?!?!

Well acording to my math you are running at 570, are you sure you saved changes in the bios?

could be the RAM

66mhz RAM with a 100Mhz fsb??

you're asking for trouble =)

i know http://www.procooling.com/ubb/smile.gif http://www.procooling.com/ubb/smile.gif

------------------
AiM-xXBrickHouseXx

Sad part is, his chip is proably running faster than mine just cause of the + series code. And ewww on you for the ram!

------------------
Watercooled K6-2 450 at 600

Have you verified in Windows what speed the CPU is actually running at?

I know several BIOSes that will not report the actual speed, but just the one that is closest.

Go get <A HREF="http://www.h-oda.com">WCPUID from H.Oda</A>, and verify what you are actually running at before you pull all of your hair out.

And, If your running a Via Apollo MVP3 chipset board (sorry too lazy to look up yer board), just run the memory at 66MHz and the bus at whatever.

About that 66MHz ram..

I had a 32mb stick of PC66 that I used to use.. (where in the hell is it now tho?) in my box at 115MHz fsb *no problems whatsoever*

also my friend has a stick of 64mb PC66 that does 100MHz fine.

Im still wondering where it is now tho..
:|

------------------
-
Classic Athlon 650@750 w/ Globalwin FKK50, 256mb PC133, 32Mb Geforce 2 GTS, 40.9gb Maxtor DiamondMax 60+, 10gb Fujitsu Picobird, Pioneer DVD103-S, Ricoh RW7120A 12x burner, IBM Etherjet 100mbps NIC, Blueyonder 512kbps cable modem, top 92mm exausting blowhole, front 80mm intake, side 92mm intake blowhole, rear 60mm exaust, rear card exaust, blue orb on video card, heatsinks fitted to 756 chipset and PLL IC. Runs at 35^C full load.

u think the all PC133 and PC100 are different nowadays?? just take a look at the rating..
i've got some 100Mhz dimms, rated at 7.5 nsec, that's 133Mhz!!