load temps very high
 

:mad: Ive made awhole diy watercooling kit for my computer which is:

pentium 650 3.4
geforce 6600gt

the load temps reaches 64c while idle is 33

the cooling componnets

hydor l30
triple 80 radiator
single 5.25 bay resevoir


please help me to overcome this problem even by designing a new block

note i have drill pres only

Re: load temps very high
 

With that high of a swing between idle and load something is definately off.

Have you tried remounting the block (maybe its sitting on an angle)?

Have you checked to see if there is flow through your block - how much? Possible blockage somewhere?

Can you tell us more about the current design of your block (pictures or drawings)?

What size tubing are you running, did you bleed the air out of the system, etc...?


I would check those before making a complete new block. If you are set on making a new block, #rotor style blocks are supposed to be good and require mainly a drill press to make.

Re: load temps very high
 

i think there is something with this block , because the gpu block is working great
with the 6600gt 30 idle 37 load

Re: load temps very high
 

hey anybody there:bawling:

Re: load temps very high
 

I hope that is just a bad drawing. If not the main area that needs cooling is not getting cooled. Suggest you do a #Rotor style block.

Re: load temps very high
 

please help to make o new one with the drill press,

if there is links or guides or tutorials ,it will be apprecciated:D

Re: load temps very high
 

This is my modified version: http://www.procooling.com/index.php?...icles&disp=128

Re: load temps very high
 

my last block was a good performer for the 478 3.0
oit made overclock it to 3.8 stable


but it was so big for the lga775