To let the NB chipset fan 3 pin power a C-Systems CSP750
 

Do I let the NB chipset fan 3 pin power a C-Systems CSP750??

I'am thinking about using a CSP750 to cool my Nf4-chip (aka NB) but the site I bougth the pump from did not recomend connecting it to the motherboard?

It would be such a nice solution letting the chip temp regulate the CSP750.
I will probably not use a radiator in the smal loop: CSP750--->Nf4-chip--->Watertank--->CSP750

Maybe a bit overkill but it give's me options for the future.:)

I will let the small loop share watertank with the big loop so it won't overheat.
MCP655--->Cpu--->Singel Heatrecore--->Watertank--->Dual heatercore--->MCP655

I will just drill two extra holes in the watertank an put two fittings extra in the tank.

I have The DFI Lan Party DR-SLI (why did a buy sli:hammer: ) motherboard if thats any help?

Pardon my spelling!

Re: To let the NB chipset fan 3 pin power a C-Systems CSP750
 

I run CSPMAG off my CPU fan header.... see no reason why not to run off NB header...

Re: To let the NB chipset fan 3 pin power a C-Systems CSP750
 

Oki thanks. I just wanted to be sure.