ok, so where is the gun nut forum?
 

I had some R/C stuff, heli that was uncontrollable and an inferno that I never could get to start, so I sold them and bought some guns:D

http://www.resago.com/guns.html

This year I bought a serbu BFG-50 , thats .50 BMG as in burt gummer's grizzly.
It is truely AWESOME!, nothing quite as satisfying as blowing a hole clean through a troublesome HD :evilaugh: or a 2" STEEL plate for that matter :p at 1000yds.

Re: ok, so where is the gun nut forum?
 

Re: ok, so where is the gun nut forum?
 

yup, right next to the 1000 rounds of .223 for my AR-15:D

Re: ok, so where is the gun nut forum?
 

gee, am i the only computer geek on this board that likes guns?

I sold my S&W sigma .40 for $200 so I can get a used in Exc. condition Sig 226 in 9mm for $400. then on my list is a springfield 1911A1.

Re: ok, so where is the gun nut forum?
 

Fellow Gun nut here...

collection:
1 Blued Colt Series 80 govt. .45acp
1 SS colt 1991 A1 govt. .45acp
1 colt nickel commander .45 acp
1 SS colt officers model .45acp
1 blued light weight officers model .45acp
1 blued colt delta elite 10mm
1 SS colt delta elite/caspian recon frame 10mm
2 blued colt enhanced 1911's 38super
1 Custom 1911 govt. model .40S&w/.357 sig.
1 custom 1911 6inche 9mm/38super/9x21/9x23
1 Springfield TRP Operator .45acp
1 Glock 23 .40 S&W/advantage arms .22 conv.
1 Colt Target model .22
1 Rossi 6in 973 .357mag
1 S&W 6in. 686+ 7 shot .357mag
1 S&W 6in. 610 10mm
1 AR15 .223
1 Rem. 1100 12ga.
1 Marlin Camp 45 .45 acp
1 Ruger MkIV .220swift


I'm pretty sure thats all of them.. but one or 2 might have slipped my mind.. thats not mentioning all the other 1911 parts I have waiting to be built.

Re: ok, so where is the gun nut forum?
 

I was looking at building a 1911 of my own. Nothing great, just your average a1 but maybe on a TI frame. Where do you order most of your parts?

I know I can get a springfield Gov model for around $400.
could I make one for that price?

Re: ok, so where is the gun nut forum?
 

I'd love to build a Ti based commander.. or get an S&W Scandium commander..

Probably not.. .. frames and slides I get from Caspian. Internals I order from brownells. The frame and slide are almost 400 alone (Ti frames are expensive too) .. then a good barrel is another 100+ I think I average close to 800 in parts by the time I'm done.. There are good deals on ebay, gunbroker, etc.. that can bring costs down, or find exactly what you are looking for already done.. I think of building 1911's like building computers.. its not usually cheaper, but you get exactly what you want with the parts that you like.

Re: ok, so where is the gun nut forum?
 

ok, here's my 1911a1 modified. It is mostly a Rock Island Armory 1911a1.
I swapped in a McCormick Hammer and compensator bushing. Peirce modular finger grips, Ajax black Pearl hand grips.
I used a dremel and sandpaper to make the grip safety less pointy. Then I re-blued the peice to make it look stock. I have an extended thumb safety on the way. I'm still trying to figure out the sights. I need some good targets.

http://www.resago.com/1911a1-3.jpg

Re: ok, so where is the gun nut forum?
 

1. Colt 1911 series 70 .45 acp with 10 boxes of Ranger +p ammo
1. Colt Python .357 mag 6 inch with 5 boxes of Hydrashok
1. Colt AR15 .223 with 1 case of Israeli SS109
1. Dragunov in .308 with 100 rounds of Norinco ammo
1. FN-FAL
1. Glock 19 with 300 rounds of cheapo CCI Blazer 115g and 50 round magsafe
1. Glock 21
1. Reminington 700 .300 mag w/ about 5 box of Federal match left
1. Ruger Vaguero .44 mag 6 inch with 2 box of .44 mag magsafe
1. Ruger Mini14 .223
1. Ruger 10/22 target hvy bbl with 2 box of .22 CB ;) and 5 box of .22 long rifle
1. Springfield M14
1. H&K M1 Super90
...still saving money to get a Barrett 82A1, or a Mechem NTW-20 in 20 cal., but they both are still way too expensive for me to upkeep along with my wife at the moment...maybe i should pick one over the other

Re: ok, so where is the gun nut forum?
 

Choose carefully. :D

Re: ok, so where is the gun nut forum?
 

http://img.photobucket.com/albums/v3...d/ddd3685a.jpg

hehehehe muhahahaha

Re: ok, so where is the gun nut forum?
 

Nice little gun there. I see you follow gun safety and have your finger off of the trigger though. Is that one fun to shoot in Taiwan? I thought it'd be hard to find a good range there.

Re: ok, so where is the gun nut forum?
 

i have it in LA, i grew up in LA, just married to Taiwan as a mail ordered groom

Everytime when shooting that thing at Angeles firing range would get some cars' alarms off :rolleyes:

Re: ok, so where is the gun nut forum?
 

Dang, I tried that, but no one wanted to buy...

Re: ok, so where is the gun nut forum?
 

nice! is that a barrett? or serbu? I can't make it out.

Serbu is working on a 20mm called the typhon.



oh, attached is my last use of my tygon tube from a W/C system I lost interest in finishing.
thats a MB 300D 5cyl turbo diesel.