Snap 2000 1.x Update files?
 

Hello all....
I have an ancient Snap 2000 that I'm trying to update that has, believe it or not, version 1.x on it.
I have all the necc files to update it from 3.x to 4.x and such, but it seems I have to update it from 1.x to 2.x first. This apparently requires 2 files- updateBIOS.exe and UpdateSnap.exe which I can't find anywhere. The Upgrade notes and such conveniently tell me to download them from the Snap Appliance site..which does nothing but link me to Adaptec- which is essentially useless.
If anyone has these files that they can email me, or send me a link to, or tell me where to get, it would be *greatly* appreciated.
Thanks!!!!!

Re: Snap 2000 1.x Update files?
 

Hi
I am also looking for Snap Server 2200 OS and Bios Update, can anyone help!!!!!!. I have an FTP server,
ftp://test:test@62.255.176.162
if someone can upload the OS and Bios Update it will be great help............
I have new drives as old ones have crashed and I have got lights blinking every sec system(once) and Disk(twice) .....
Cheers......

Re: Snap 2000 1.x Update files?
 

Hi,
I am still looking for the same files, have been for a few months. I need the exact files as Snap Happy. I have an old Meridian Snap and am looking to get 2 120gb drives into it, nothing more.

Thanks,
Mike

Re: Snap 2000 1.x Update files?
 

Sorry, I don't no of any BIOS updates for the 2200. You may have to deal with Adaptec/SnapAppliance tech support for that one.

I don't know your reason for updating the bios in a 2200. If your bios version is > 2 it should support large disk with v4 OS.

David

Re: Snap 2000 1.x Update files?
 

The blinking light mean that the Snap server does not have an IP address. If you replaced both drives you have lost your OS. IF it was in raid 1 install one back in, to recover.

David