Mcw30
http://www.swiftnets.com/products/mcw30.asp
looks nice. |
Re: Mcw30
Still wish they'd show the inside. We'll have to wait for a review, I guess.
|
Re: Mcw30
If they were proud of the internals, they'd show 'em.
|
Re: Mcw30
If they were not at all concerned that their product would be ripped off before it got to market, they'd show 'em.
|
Re: Mcw30
DFI Lan Party SLI= Not compatible
then I dont care. |
Re: Mcw30
Quote:
|
Re: Mcw30
Quote:
Quote:
|
Re: Mcw30
Quote from Swiftech site : " Completely unrestricted chamber to minimize pressure drop."
There's nothing inside, empty volume. Have a look to the last page in the PDF, you'll see it. No need more for a single chipset. |
Re: Mcw30
same as mcw20, have one, does the job -> what more to ask?
about the DFI, the manufacture is the problem, IMO, hard as it is to change even to a different passive heatsink let alone a waterblock, does not pay to be "different" :). |
Re: Mcw30
7W ?
a year or two to get to 10-11W |
Re: Mcw30
7w?
seems more to me. |
Re: Mcw30
info from a chip mfgr
measure ? (not me, lol) I evaluated to 20W for laughs (but did not measure the mobo output) |
Re: Mcw30
i would go further than 20W.
the nforce4 sli chip (example) seems to be hotter than that -> large HS and active cooled. |
Re: Mcw30
could be, no real info
|
Re: Mcw30
We could do this through reduction.... granted I don't have exact numbers
"Typical" system: MB: DFL NF4 SLI CPU: 3800 X2 GPU: 6800GT (x2) RAM: 1gb DDR 400 HD: 250GB WD Fans Such a system pulls about 350w. Assume that, other than fans and HDs, all electrical input is put out as heat (no mechanical work done, therefore heat is the only option). HD -20w. RAM -10w. 6800GT(s) - 80w apiece. 3800 x2 -100w (anyone know the TDP off the top?). Knock another 20w for fans. That leaves us with 40w. Can't imagine a chipset putting out that much. Anyone else want to fiddle with these numbers? The way I look at chipset WBs.... one less fan in the system. |
Re: Mcw30
Quote:
Even if the numbers were accurate, electronics power draw does not equal power into heat... |
All times are GMT -5. The time now is 10:49 AM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...