Mixing Metals...
 

I'm curious about what types of metals can be used in a WC setup. I know that Copper and Aluminum are a bad combination if you don't take some serious precautions, but what combinations of metals can be used without turning your WC setup into a Battery or having it eat itself from the inside out? Is Copper and Stainless Steel ok for example? Thanks for the help guys.

Re: Mixing Metals...
 

You can mix brass and copper with no trouble at all.

Re: Mixing Metals...
 

i dont think you would have trouble mixing ss and copper but ss is heavy so its not really a good choice and definitly copper and brass is a good mix

Re: Mixing Metals...
 

I was asking about the Stainless, because I have been considering running a Watercooling setup for some time and I keep tossing around the idea of using SS hard lines with AN Fittings. The tricky part is the fact that the fittings are anodised Aluminum. I like the look that hard lines have when used in cars and trucks. This is by no means set in stone. It's just an idea that I have been toying with and having lurked here for some time I know that this is the best place to ask a question like this.

*edit: bad tag