Water Cooling Question - 2 Loops
 

This is my first water cooling set up and I'm going high end parts with 2 loops.
Case: Lian Li V2000B+
Power Supply: Seasonic S12 600W
Pumps 1: Swiftech MCP655 12V Pump
Pumps 2: Swiftech MCP655 12V Pump
Radiator 1:Thermochill PA160
Radiator 2: Thermochill PA120.2
CPU Block 1: Swiftech Storm CPU
GPU Block 1: Swiftech MCW60 VGA
GPU Block 2: Swiftech MCW60 VGA
Chip Block: Swiftech MCW30 Chipset
Reservior: Swiftech MCRES-MICRO Hi-Flo
Tubing: Tygon 7/16" ID

Proposed Set Up
Loop 1: Pump > Rad > GPU > GPU > Res > Pump.
Loop 2: Pump > Rad > CPU > Chip > Res > Pump.
Pumps 2 off, 1 for each loop.
Radiator 2 off , 1 for each loop.

Note:I'm going with a reservior not "T" Line.

My question is - Do I need seperate reserviors for each loop or can I just use a "Y" splitter/joiner and bring both loops into the one reservior then use a "Y" to bring them back out?

Or is there perhaps a better way to do it.

Thoughts/comments appreciated.

Thanks

Re: Water Cooling Question - 2 Loops
 

Dont Y them together. Probably better to put it all in one big seris

Look for LHG he will know.

Re: Water Cooling Question - 2 Loops
 

OK.... After more thinking and research and more thinking and research.... ahhhh..*sigh*.

'Parts same as original post'.

My dilemma is further from original post:

What would be a better option:
A. One loop & One pump
1. Thermochill 120.3 rad to cool - Pump > Rad > CPU > Chip > GPU > GPU > Res > Pump.
2. Thermochill PA160 & PA120.2 to cool - Pump > PA160 (Rad) > GPU > GPU > 120.2 (Rad) > CPU > Chip > Res > Pump (not sure if one pump will be strong enough).

B. One loop & Two pumps
3. Thermochill PA160 & PA120.2 to cool - Pump > PA160 (Rad) > GPU > GPU > Pump > PA120.2 (Rad) > CPU > Chip > Res > Pump.

C. Two loops & Two pumps
4. Loop 1: Thermochill PA120.2 to cool - Pump > CPU > Res > Pump.
....Loop 2: Thermochill PA160 to cool - Pump > GPU > GPU > Chip > Res > Pump.

All scenarios can fit into case with some modding.

I'm just looking for the best performing set up. I'll be using Tricod fans to keep as quiet as possble.

Suggestions/advise welcome.

Thanks.