Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   FS/FT Forum (http://forums.procooling.com/vbb/forumdisplay.php?f=10)
-   -   FS: Opteron 144 CAB2E 0546 - Very low batch # (http://forums.procooling.com/vbb/showthread.php?t=12927)

MaStA 03-10-2006 08:24 PM

FS: Opteron 144 CAB2E 0546 - Very low batch #
 
Hello,

I have an OEM Opteron 144 CAB2E 0546 UPMW processor with a batch number of 50028 that I have used for about three weeks only. As many may know, under 30 are considered cherry chips. I have sold a couple to people and all of them have achieved at least 2.9ghz on them. They were not a cherry chip like this one though, and they required over 1.5v to get 2.7ghz stable. I have not even tried to go higher than 2.7ghz, which only took 1.475v to achieve. Below is a screen shot of it primed at that. I may try going higher just for selling purposes. If you have any questions let me know. I am going to go with $200 or best offer. I want offers so that is why I priced it at $200 obo. :)

EDIT - I just booted at 2.9ghz. I will run SuperPI and see how that goes. http://valid.x86-secret.com/show_oc?id=78015

http://img.photobucket.com/albums/v3...screenshot.jpg

Thank you,
Jared

FuRi0 03-11-2006 09:49 AM

Re: FS: Opteron 144 CAB2E 0546 - Very low batch #
 
i would offer to buy that but i have a opti 165 CCBWE 0551 UPMW and its sitting at the same clock with 1.375v
and its dual core and was the same price as you are charging .. give or take P&P

no ofence m8 but thats a bit high
maybe on ebay where people dont know nething but not here :doh:

its max boot and prime stable is 343x9 on my asrock dual sata2 and its only cause i cant get it to go over 1.45v on the board
(roll on DFI xprt)

also you are saying that it sits at 2.7 stable with 1.475v but in actual fact its 1.49 thats only a .01 reduction from the other chips

MaStA 03-11-2006 10:42 AM

Re: FS: Opteron 144 CAB2E 0546 - Very low batch #
 
Quote:

Originally Posted by FuRi0
i would offer to buy that but i have a opti 165 CCBWE 0551 UPMW and its sitting at the same clock with 1.375v
and its dual core and was the same price as you are charging .. give or take P&P

no ofence m8 but thats a bit high
maybe on ebay where people dont know nething but not here :doh:

its max boot and prime stable is 343x9 on my asrock dual sata2 and its only cause i cant get it to go over 1.45v on the board
(roll on DFI xprt)

also you are saying that it sits at 2.7 stable with 1.475v but in actual fact its 1.49 thats only a .01 reduction from the other chips

Well my motherboard overvolts a little. How did you get a 165 for $200? Please enlighten me. I also said $200 or best offer. I am not expecting to get $200. I just know places require you to post a price. I want offers on it....

Jared

FuRi0 03-12-2006 04:24 AM

Re: FS: Opteron 144 CAB2E 0546 - Very low batch #
 
my opti cost me $221 from a friend second hand he had it then replaced it for a 180
why i dont know but still i dont care why he did it :)

im not trying to kill your tunder but the 144 and 165 seam to be on power with each other exept the 165 is dual core


All times are GMT -5. The time now is 02:46 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...