Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Snap Server / NAS / Storage Technical Goodies (http://forums.procooling.com/vbb/forumdisplay.php?f=82)
-   -   how to connect cpu fan in snap 4100 (http://forums.procooling.com/vbb/showthread.php?t=13554)

digital-tom 10-13-2006 08:52 AM
how to connect cpu fan in snap 4100
 
Hi,

I have got a snap 4100 with an defect fan, exactly the defect fan was removed.

I bought a new fan and no I have no idea how to install the fan.

There are two free PIN Connectors on the Motherboard.

J11 is between CPU and RAM.
J12 is between RAM and Network Port.
J14 is for the 2 case fans.

I think, one is for the fan and the other one for the thermal resitor.

Does anybody know the electrical values of this resistor (NTC?).
I need a new one too :-((

Thanks for your advice.

re3dyb0y 10-13-2006 09:04 AM
Re: how to connect cpu fan in snap 4100
 
I dont know about the 4100, but my 2200 plugs straight into the power cables (molex thingys to the hard drives)

blue68f100 10-13-2006 01:15 PM
Re: how to connect cpu fan in snap 4100
 
Either Phoenix or Jontz should be able to answer that.

Phoenix32 10-13-2006 02:34 PM
Re: how to connect cpu fan in snap 4100
 
Not me this time. I have not seen the insides of a 4100, so I do not know. The 4000 uses the Molex connectors like Sam's.

blue68f100 10-13-2006 02:42 PM
Re: how to connect cpu fan in snap 4100
 
Do you know how the cpu fan jack is labeled on the 4000?
The photo shows it by the ram slot near the cpu.

It could be the same for 4100

Hallis 10-13-2006 02:50 PM
Re: how to connect cpu fan in snap 4100
 
why not just get a fan that uses molex connectors?

Phoenix32 10-13-2006 06:11 PM
Re: how to connect cpu fan in snap 4100
 
Quote:
Originally Posted by blue68f100
Do you know how the cpu fan jack is labeled on the 4000?
The photo shows it by the ram slot near the cpu.

It could be the same for 4100
The CPU fan for all three of my 4000's comes off a molex connector/splitter with the hard drives, not from the circuit board...

rpmurray 10-14-2006 11:59 AM
Re: how to connect cpu fan in snap 4100
 
Quote:
Originally Posted by digital-tom
Hi,

I have got a snap 4100 with an defect fan, exactly the defect fan was removed.

I bought a new fan and no I have no idea how to install the fan.

There are two free PIN Connectors on the Motherboard.

J11 is between CPU and RAM.
J12 is between RAM and Network Port.
J14 is for the 2 case fans.

I think, one is for the fan and the other one for the thermal resitor.

Does anybody know the electrical values of this resistor (NTC?).
I need a new one too :-((

Thanks for your advice.
On both of the 4100s I have open on the bench now, the CPU fan plugs into J11. J12 on both units is unoccupied.

re3dyb0y 10-14-2006 02:09 PM
Re: how to connect cpu fan in snap 4100
 
Nice one rpmurray

Jobs a good 'un

Hallis 10-14-2006 03:19 PM
Re: how to connect cpu fan in snap 4100
 
Quote:
Originally Posted by re3dyb0y
Jobs a good 'un
that British slang for something? :uhh:

lol

Shane

re3dyb0y 10-15-2006 04:40 AM
Re: how to connect cpu fan in snap 4100
 
Quote:
Originally Posted by Hallis
that British slang for something? :uhh:

lol

Shane
Quiet You




Old people say that too :P

jontz 10-15-2006 08:20 PM
Re: how to connect cpu fan in snap 4100
 
Sorry that I couldn't jump in on this one guys! I had ANOTHER death in the family, have been away for a few days. Guess you'll have to revoke my forum privilages for a while for slacking off :D


All times are GMT -5. The time now is 08:35 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...