Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Snap Server / NAS / Storage Technical Goodies (http://forums.procooling.com/vbb/forumdisplay.php?f=82)
-   -   snap 4100 asain language (http://forums.procooling.com/vbb/showthread.php?t=14327)

141starlifter 09-06-2007 05:36 AM

snap 4100 asain language
 
I got a used snap 4100 OS verision 2.4.441 when I conect to it I found out it is set to asain language 932. How can I change this to english?

Phoenix32 09-06-2007 07:53 AM

Re: snap 4100 asain language
 
do a full factory reset to defaults.

141starlifter 09-06-2007 08:00 AM

Re: snap 4100 asain language
 
I did a full restore by starting the unit with the reset selected and then pressed the reset 5 times and restarted the system. This cleared the password but still in the wrong language.

blue68f100 09-06-2007 10:46 AM

Re: snap 4100 asain language
 
Look under the server settings (admin) you should have a option there.

141starlifter 09-06-2007 10:53 AM

Re: snap 4100 asain language
 
The problem is I can not read It

Phoenix32 09-06-2007 12:07 PM

Re: snap 4100 asain language
 
Do a 4 LED Flash reset (not 5)...

Then use assist rather than log straight in by IP (it has an initial setup that will set the language to the language of your client).

blue68f100 09-06-2007 12:43 PM

Re: snap 4100 asain language
 
On the pull down menus for language support on mine you want the middle options. US English and 437. There is also a option in the bios for International support. But I know of no one who needed these.

You can reinstall the OS and load the english files if needed. But at v2 you need to do some updates.

141starlifter 09-06-2007 12:49 PM

Re: snap 4100 asain language
 
Does it matter if I do not drives installed? Can I access the Bios? How do I reload the OS? Where do I get it from?

blue68f100 09-06-2007 04:52 PM

Re: snap 4100 asain language
 
The OS is retained in flashram so it should not, but may be needed to change lang sets. The only option in bios is if international is enabled or not.

If you contact Adaptec and ask nicely through an email support request, they have been providing v3.4.807, last free version. You must pay $$$ for v4.

To reload OS you will need assist, since you can not read the screens.


All times are GMT -5. The time now is 11:58 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...