a few pics of my setup...
 

Ok what you see there are a few pics of some of the stuff I made,however not all running in current system.
water block construction... http://image.pbase.com/u/stevo10/med...7.DSCF0004.jpg

waterblock with cold plate screwed to waterblock.... http://image.pbase.com/u/stevo10/med...9.DSCF0001.jpg

with peltier mounted.... http://image.pbase.com/u/stevo10/med...1.DSCF0002.jpg
and again here.. http://image.pbase.com/u/stevo10/med...4.DSCF0009.jpg

it works!!!!!!... http://image.pbase.com/u/stevo10/med...5.DSCF0011.jpg
the control box... goes... pump>radiator>cpu>radiator>tank
control box http://image.pbase.com/u/stevo10/med...2.DSCF0005.jpg
chill tank....... http://image.pbase.com/u/stevo10/med...8.DSCF0014.jpg
and again... http://image.pbase.com/u/stevo10/med...7.DSCF0015.jpg

I'm not currently running the chill tank or the peltier.Its just waterblock to cpu and ambient water.
Its working well and the water temps remain constant so the radiators are doing their job.Interesting though I went to great lenghts to insulated around and under the cpu for the peltier setup,however when running just the waterblock I found the load temps too high.I removed some of the foam in the chip socket cavity but still have some silicon there. The temps dropped straight away?I figure that this foam I had placed there was making some kind of heat insulation and trapping the heat in.
I'm now wondering if I should even remove that silicon there.
the final setup looks something like this , http://image.pbase.com/u/stevo10/med....DSCF00063.jpg
however there are a couple of mods to the box since with some fan holes and a digital temp readout.I'll post pics not too soon...
stevo

cool, what pelt's on ur chill tank?

the peltier on the chill tank is 60w 12v
cheers stevo

That is a really professional looking setup. :cool:

What rad is that?

two rads,one is a modified senfu and the other is a motorcycle oil cooler
stevo

Damn... the pics didn't work.

great, nicely done, I posted my new water cooler system on my page www.mattkosem.com in the tweaking section. my old system is there too!

--MAtt

I tried to look at ur pictures but I keep getting a white page with the word FORBIDDEN on it. It says that I am forbidden to look!

Forbidden
You don't have permission to access /u/stevo10/medium/142822.DSCF0005.jpg on this server.


--------------------------------------------------------------------------------

Apache/1.3.20 Server at image.pbase.com Port 80

try this then http://www.pbase.com/stevo10/inbox
if asked for login use chancell@ihug.co.nz
pass= gears4480
think the policy changed on bandwidth usage thats why you got errors before
stevo