Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   Holy Moly, I could fry eggs on this baby! (http://forums.procooling.com/vbb/showthread.php?t=14500)

kylehug 11-28-2007 08:00 AM

Holy Moly, I could fry eggs on this baby!
 
Hello, I'm new to liquid cooling.

I've had the setup (my first liquid cooled) for about 2 months:
CPU: Pentium D 935 (3.2)GHz
MB: Asus P5WD2E-Premium
GPU: Geforce 8800 Ultra
RAM: 2 GB PC6400
PSU: 650W
Case: Koolance PC3-725SL
Cooling Setup: 1/2" Tubing running from Reservoir>CPU>GPU>Pump/Radiator w/ Fluid XP+ Coolant

Nothing is overclocked

Anyway, I've been having problems with Crysis crashing after a few minutes of playing. The point at which it would crash ranged from 5 to 20 minutes or so. I initially tried updating/changing up drivers with the assumption that was the problem, but then I downloaded a temp monitoring tool and played Crysis for about 15 minutes, closed it and checked to see what my temps were. It reported that my CPU was running at 52 deg C at between 75-90% load which isn't bad as far as I know, but the video card was bouncing between 95 deg C and a whopping 105 degrees C ! :bawling:

Obviously this is why it is crashing, and even if it's not, it doesn't matter because these temps can't be normal and I need to figure out how to get more efficient cooling out of my system.

As stated above right now I have the liquid running to my CPU and then the Video Card. My question is, would I see huge difference if I swapped the order so that the liquid hits the Video Card first and then the CPU?

Thanks

ben333 11-28-2007 05:11 PM

Re: Holy Moly, I could fry eggs on this baby!
 
Most of the time, every spot in the WC setup is only 1C cooler or hotter than the rest. (lines not blocks) so that order dose not matter. I would say remove the block, wipe it off good and use a small drop of thermal paste in the center of your GPU. Make sure the block is tight also. Good luck!

kylehug 11-28-2007 05:42 PM

Re: Holy Moly, I could fry eggs on this baby!
 
Thanks for the reply

It's actually a pre-mounted block that came with the card so I'll need to call the manufacturer to see how that would affect my warranty. Maybe I can get them to replace the card if nothing else.

ben333 11-28-2007 06:35 PM

Re: Holy Moly, I could fry eggs on this baby!
 
I would give them a call. Best of luck :)


All times are GMT -5. The time now is 09:14 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...