Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Heatsink/ Heat Pipe / ThermoSiphon Cooling (http://forums.procooling.com/vbb/forumdisplay.php?f=13)
-   -   HELP! (http://forums.procooling.com/vbb/showthread.php?t=1477)

00silverGT 07-03-2001 02:45 PM

HELP!
 
As you guys know I'm new to this AMD environment. I am kinda been spoiled with the less heat producing Intel CPU's. But since the performance and $$ is advantageously leaning towards AMD...To make a long story short, I don't own stock in Intel!
Anyway, I installed my new T-bird last weekend, 1.2GHz AXIA with MC-370-OA cooling her that is assisted by a Delta Black Label fan. (all bought from Crazy PC, which BTW, pissed me off since they mailed my Shim in 5 pieces!) In idle the ASUS Monitoring Utility from my A7V133 reports a temp of 50 C. Being an American I did the conversion and this is quite shocking! Doe they run this hot? No overclock, only thing I can think of is that maybe the fact that it is summer with an average temp of 97-100 F maybe overheating this puppy? I get similar readings when we in the bay area was blessed with a low pressur esystem and the ambient was around 78 F. I checked if the CPU core was making contact with the HSF and it is...anything else to check? Thanks a million.

resago 07-03-2001 04:19 PM

1.) remove the shim.
2.) remove the shim.
3.) remove the shim.
4.) check your application of heatsink paste.

resago 07-03-2001 04:20 PM

my 1.33ghz runs 40C constant with the thermo-engine.

00silverGT 07-03-2001 07:07 PM

I don't have a shim since the people from crazy PC has been "careful" enough to send it to me in five pieces. What do I check in the application of the thermo gunk? I have it liberally all over the core. Thanks.

Darkhorse 07-04-2001 09:47 AM

Take the ASUS monitor temp with a pinch of salt about 10c's worth.
Try MBM5 instead.
If it still reads high check your thermal paste. You are using arctic silver paste?
Thermal paste should be a very thin layer.
See This

If your new to AMD's be careful with the HS on the core.

00silverGT 07-05-2001 02:39 PM

Thanks guys, I have a Digital Doc (version 1) and when I placed the probe on the heatsink it recorded 100 F...should the Swifttech MC370-0A (with a Delta) be getting this warm with a given Ambient Temp of 86.9 F?

DSREC 07-07-2001 10:08 PM

I think I've been using too much Artic Silver all this time.. I dont see too many severe negatives resulting from it, but sheesh. 1/4 of the size of a BB? that seems a bit small


All times are GMT -5. The time now is 12:04 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...