Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Hardware and Case Mod's (http://forums.procooling.com/vbb/forumdisplay.php?f=20)
-   -   Painting Question... (http://forums.procooling.com/vbb/showthread.php?t=1902)

Kevin 10-31-2001 04:16 AM

Painting Question...
 
Well this question is directed to all those who are experienced w/ painting PCs... now there are like 50 million coats of paint you can put on your PC. Does anyone know if there's some kind of clear coat that can keep something from being painted over again? Like if I wanted to paint an object red, and then let that paint dry... and then put a clear coat over it that would keep any further paint jobs from drying on top of it, would this be possible? This is CRUCIAL!!! :)
-Kevin

iceheart 10-31-2001 06:30 AM

Masking tape!

Tweekster 10-31-2001 12:32 PM

Even if you could find a 'teflon-like' coating, you would still have to mask off the other areas around it so new paint would stick. I've used a couple of tricks to detail small objects....first paint the 'red' object and let the paint harden for 24 hours, then coat the object with a thin layer of Vaseline, paint the other color, then before it fully hardens, carefully wipe off the 'red' object...Hobby shops sell a liquid masking solution for detailing models, paint it on, let dry, x-acto off the surplus, paint the second color, then peel off the masking film

ezlid 10-31-2001 01:23 PM

There are at least two things to use. The spray masking Tweekster mentions and an adhesive backed vinyl you use to make a protective stencil. Both work better than masking tape because you can make finer edges. I'm not to sure about using vaseline for masking - seems iffy, but Tweekster may have some tricks.

Kevin 10-31-2001 03:31 PM

I think I need to explain what my object is... there is a certain fraternity rivalry on campus. We need to keep a statue painted red and the other fraternity needs to keep it painted green. I'd like to paint it red and then coat it w/ some kind of clear coat, to keep it from being painted green again. Is this possible?
-Kevin

resago 10-31-2001 05:07 PM

paint it red, then cover it with a nice 20 weight oil, or crisco even.

Kevin 10-31-2001 05:14 PM

Quote:

Originally posted by resago:
paint it red, then cover it with a nice 20 weight oil, or crisco even.
Seriously?

IronHelix 10-31-2001 05:57 PM

Actually that sounds like it might work... the oilyness would make the other paint either sheet right off or once it dried the oil would provide no bonding strength and it would just crack off. In theory for that any kind of oily goo would work, pref. something that wouldnt be easily rubbed off or dissolve in rain.

Good luck!

Kevin 10-31-2001 07:23 PM

What about painting it red and then covering it in a thin coat of vaseline?
-Kev

ezlid 10-31-2001 09:44 PM

And I thought you were gonna do some fancy case work! You need two things; some fast drying red spray paint and after it dries, spray it heavy with silicone spray It is invisible, but the green paint will bead up and not stick. Better get it done quick before the other side beats you to it.

Kevin 10-31-2001 09:47 PM

Haha thanks. What kind of silicone spray should I get? Where can I get it? How much does it cost? :)
-Kevin

ezlid 11-01-2001 11:53 AM

Home Depot, etc and most hardware stores should have the silicone spray. Also auto parts stores. Cost - not sure, I don't buy it often and for "normal" use a can lasts quite a while. How much? How big is the statue? You want to have a good coat on it, so you will have to guess. For your frat deal, I don't think you can put on too much. This would be a lot easier if you you were doing a drop-dead case. lol

ezlid 11-01-2001 11:58 AM

Forgot what kind. Any cheap brand will do.

Tweekster 11-01-2001 05:25 PM

Car painters hate silicon based waxes, too hard to paint over.....go to Wal-Mart, get a cheap silicon wax, put on a heavy coat, buff out, then apply the silcone spray.....may take weekly maintainence to keep maximum 'protection'....hehe

IronHelix 11-01-2001 05:30 PM

lol I'd like to see the look on the green teams faces when they notice their paint isnt sticking...

Lord Twilight 11-04-2001 06:46 PM

Unless they get some strong paint stripper.. I got some once and sprayed it on some old rims for my car that I got from the junkyard. They were chrome with a clear coating for protection, but since were at the junkyard, they were all dull and ugly. I got them for $100 total, and sprayed the stripper on (haha, that sounded funny :D) and in like 20 minutes, they were bright shiney chrome again. The coating started bubbling and peeling off almost instantly.

BTW, thank's Tweekster, I was looking for something to do exactly what you described.

[ 11-04-2001: Message edited by: Lord Twilight ]

resago 11-04-2001 09:01 PM

is the statue small enough to fit in an oven?
if so, powercoat it.

phreenet 11-05-2001 05:10 AM

Why don't you just chain yourself to this statue?

LiquidCool 11-05-2001 11:15 AM

MMMMMMM VASELINE.... heheh

Butcher 11-08-2001 05:51 AM

Chained to a vaseline coated red statue... can't you get arrested for that? :D


All times are GMT -5. The time now is 05:52 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...