Spir@l Q's
 

If you read [H] ignore this:

In honor of fixittt's blocks going mass production, I've got a few Q's.

Dimentions?
How (if?) can you mount a cold plate on them?
If that can be done, how manny pelts did it hold? 1, 2?

If you have mounted a pelt or 2 on a spir@l, can you post pics? I'll gladly host them if you don't have a host. Just PM me.

Yes, I've seen fixittt's site where he has the ALU spir@l and pelt, but I wanna know how to do it.

Thanks!

Adding pelts is really easy with the Spir@l block. It can hold any pelt combonation that any other block that utalizes the 4 hold down method such as the maze series of blocks and anything else on the market. Those hols for the hold down bolts are what limits the size of pelts.

As for the cold plate.

it just needs to have 8 holes drilled into it. Of course the 4 holes for the hold down, and 4 holes to bolt it to the block. With my block design, the 4 holes that bold the top top the block go all the way thrue. And can be tapped on the bottom to bolt the cold plate directly to the block. Giving you the adaquate preassure needed for the pelts.


Hope this answeres your Qs

thanks!
That answers my Q's.

I'm thinking either dual 156W or just one 172W pelt.

but it all comes down to how much $ I have at the time the TBreds are out :->