Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Random Nonsense / Geek Stuff (http://forums.procooling.com/vbb/forumdisplay.php?f=15)
-   -   This sucks... my athlon read guys... (http://forums.procooling.com/vbb/showthread.php?t=2496)

cristoff 03-15-2002 10:42 AM

This sucks... my athlon read guys...
 
still wont go to 133fsb... at all... my athlon guys... I did the thing with the rear window defogger kit... it still wont... hrmmmm.... pff... this sucks!

Brad 03-15-2002 03:26 PM

ok, more details are needed. what ram, cpu, mobo?

cristoff 03-16-2002 04:58 PM

hmm... soyo k7v dragon.. ddr333 kingmax ram... i guess thats all you need... bump....

EMC2 03-19-2002 06:19 PM

What multiplier, what RAM settings, what temps, what voltages, and what else is in your system?

Suggestion - disconnect/remove/disable everything except your video card, floppy drive, and keyboard. Set your CPU multiplier to 8. Set your RAM timings to slowest (2.5,3,3,6,3,2T, etc.). Set your AGP to 1X. Disable Fast Writes, Byte Merge, USB, and any onboard extras (sound, RAID controllers, etc). Have a bootable floppy. Now starting at what you know it boots at (FSB wise) start raising the FSB by 5Mhz at a time, see if it boots. Even better, download MemTest86 and put it on the floppy. Let it run a pass of the standard tests before saying "ok, this FSB is good".

Once you find the Max FSB, if it is still less than 133Mhz go into your BIOS at the highest it will run at and look at your voltages and temps. What are they?

cristoff 03-20-2002 07:07 PM

the highest i get is 120 and the temps are this 38c load and idle is 33c and the ambient is 22c

Haddy 03-20-2002 10:51 PM

stupiud question but are u sure the chip is 133mhz and not a 100mhz

admar2 04-15-2002 12:35 PM

can't remember which line of the stepping it is, but at the end of one of the lines there is either a "B" or a "C" if it's B the chip is a 100mhz bus chip, if its a C the chip is a 133 bus chip....

but the B chip should run fine at 133 providing you lower the multiplier .5 I believe.....


also is there a 100/133 jumper on that board??

DigitalChaos 04-15-2002 12:59 PM

drop the multiplier

Brad 04-16-2002 03:08 AM

yeah, it may have a 1/3 and 1/4 problem with a 100/133 jumper. just drop the multiplier too

ksw 05-03-2002 08:28 AM

hmm my guess is that its low quality OCZ ddr 333 RAM.... is it?

cristoff 05-08-2002 07:51 AM

actually no..
 
the fact is its an athlon-b instead of c that is the 133fsb version... so i can only go up to 132 at most... but the ram is fine... its kingmax ddr333 tinyBGA... which is sweet and my soyo k7v dragon


All times are GMT -5. The time now is 10:00 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...