Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   ID of maze2 connectors. (http://forums.procooling.com/vbb/showthread.php?t=2637)

TiTch 03-31-2002 11:01 AM
ID of maze2 connectors.
 
I have just made a res out of a thick walled bottle. Having drilled the holes and put in connector I am now wondering if they are big enough. I want to get a mase 3 and was wondering of anyone has a mase 2 about with 1/2" connectors and could measure the internal diameter for me. Ta.

Brad 03-31-2002 02:17 PM
I have a maze1c with 1/2" connectors, they are 3/8" ID

TiTch 03-31-2002 02:25 PM
Thanks, the ID of my connectors is 9.5mm which is as good as the same as 3/8". It was shuch a pain drilling a 12mm hole in a thick walled bottle, I'd hate to do it again.

Brad 03-31-2002 02:33 PM
just finding a 12mm drill bit (or anything above 10mm) is often just as hard as the actual drilling itself. I normally grab a 2mm bit first, then go up slowly

TiTch 03-31-2002 03:10 PM
I did not have access to any diamond drill so I used a diamond boarer that dentists use for grinding out roots. Put it in my piller drill and it was great. Just takes a bit of time to grind the glass away.


All times are GMT -5. The time now is 01:20 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...