ProCoolers Unite! Bulk Maze3 Purchase
 

I'm sure a lot of you who frequent the ProCooling forums are itching to pick up a Maze3 from DangerDen. Well, since there are so many of us who want one, I was thinking a bulk purchase would be in order? Perhaps if we place an order of approximately 15-20 Maze3's all at once, we can get the kind folks over at DangerDen to give each of us a slight discount. Group purchases are done all the time and often yield discounts, so I figure why not at least talk to DangerDen about it and see what happens.

Please respond to this thread if you would like to be a part of this group purchase. If we can get 15-20 people in on it, then we'll talk to DD. :)

hehe im numba 1! sure im in, depending on how much we get off and when this thing will go down....dont forget if u have it all shipped to u that u have to ship it to us which costs $$

yea the double shipping thing is gonna suck... but why not see if procooling readers can get a discount? thats not any different than just a mass order... they ARE the makers.. not a reseller that is gonna benefit more from a mass order.

first let us know about the price... if its good enough, im sure you wont have a problem getting the people to add to the order.

maybe we could get them to ship to differant address's?

wouldnt that be the exact same thing as a procooling discount?

No need for a bulk order discount in my case. Danger Den has been so good to me that I would be happy to pay their retail price.

Ugh... I was hoping for a much better response than this. Oh well though, I suppose I agree with Mr. Thompson. The Maze3's are priced quite fairly to begin with. :p

Already ordered mine... :(

I would be in if I didn't make my own blocks.:p

I wish I could make my own blocks. hmmm, I do have access to a fairly large machine shop......(dreaming)......

--Matt

hehe for 2500 bucks u can do it....desktop cnc owns joo

I would never buy a water block. not a DD or any other block on the market. HEHEHEHEHE i think U all know why

I dont know whats wrong with the normal price i think thats as cheap as they will go. look at what you get and how cheap it is. Im not complaining about that price or gonna try to get a discount cause i think they deserve every penny for that block is really nice.

i just waiting for maze 3-1....................................

I certainly agree that guys at Danger Den deserve every penny not only for the Maze 3 but for all their blocks. Believe me, they worked really hard to come up with the unique Maze3 design.

That being said, here's an exclusive offer from cooltechnica.com for ProCooling forum readers, only!
FREE GROUND SHIPPING IN USA FOR ALL DANGERDEN CPU BLOCKS INCLUDING THE NEW MAZE3 !!! :D
How about that?

Here's the link:
http://www.cooltechnica.com/Merchant...tegory_Code=DW

E-mail your invoice number to dacooltech@cooltechnica.com , and I'll take care of the rest.

If you need other parts, please order them separately. And don't forget this offer is valid for a limited time.

Take care,

Bruce

www.cooltechnica.com

Wahoo free overnite shipping :P lol j/p

im gonna be ordering a maze 3-1 and 226w tec dunno if from dangerden or from you tho hehe.
i might be ordering one w/ spare parts do you guys have that to?

how bout u give me the block for free and ill pay for the shipping haha, but yea dds price is good but y fault us for trying to go lower....jason ur such a downer man, just a stick in the mud

Yknow it just struck me that living where I live, paying for the block and getting free shipping would probably cost less than paying for shipping and getting a free block :D

Jason-Pro -"im gonna be ordering a maze 3-1 and 226w tec dunno if from dangerden or from you tho hehe.
i might be ordering one w/ spare parts do you guys have that to?"

Yes we'll have the spare parts, too. Check out the news section of cooltechnica.com. When we get an ETA for the MAZE3-1s from DD we'll post it there.

Haddy - "how bout u give me the block for free and ill pay for the shipping haha, but yea dds price is good but y fault us for trying to go lower....jason ur such a downer man, just a stick in the mud "

LOL :) How about a complete barebones on the side Haddy? :D

woot! happy doing busniess with u! so how much to ship :p oh btw cooltechnia has pretty good service..got my first bix there....i wuz a lil conserned to c that a couple of the fins had been dented in and the paint had been chipped off...butt hats ok itll be covered up by a fan anyways....

Hi Haddy,

I'm glad that you are happy with our services.

Although what you are saying seems like a minor issue and won't effect the performance, please do me a favor and send me an e-mail stating what you just mentioned and a pic of your Xtreme if possible. My e-mail is dacooltech@cooltechnica.com

Thanks,

Bruce
www.cooltechnica.com

yea it looks like something banged up against it....ill try to get a pic here in the next week (gotta borrow friends dig cam)

just curious...
how can you sell these blocks at DD's price?
are you just "breaking even" or do you still make a profit?
(hope that's ok that I'm asking)

is your block 1/2 or 3/8? it's not listed (that I can see..)

Haddy - "yea it looks like something banged up against it....ill try to get a pic here in the next week (gotta borrow friends dig cam)"
That'll be great Haddy. thx :)

Techguy - First question that you asked is something that I can't answer in a public forum as you can imagine.

For the second question the Maze3 comes with both 3/8" and 1/2" fittings. You can choose the fitting size from the drop down menu here: http://www.cooltechnica.com/Merchant...tegory_Code=DW

FYI if you are already using 3/8" ID silicone tubing, i suggest you to get the 1/2"OD fittings for the block, because the 3/8"ID silicone fits nicely over 1/2"OD barbed fittings.

Bruce
www.cooltechnica.com

its fairly obvious.........he gets them at distro prices

thx Brad :)

Ok, one more time the FREE "UPS GROUND" SHIPPING DEAL IS GOOD ONLY IN THE USA!
Please don't e-mail me asking if we can ship worldwide for free!!!

Bruce