Psu Testing
 

I think my PSU died .How would it be possible to check it out with a volt meter?

http://www.directron.com/directron/tester1.html ive used these in the past....works great

Thanks Haddy . I was lucky enough to bump into an ATX connector
skematic and was able to test that way, everything checked out as it should :) .So I really don`t know what was going on but the PSU is fine again and re-mounted in the box.Slap me silly :D for forgetting to post , that i found a solution and I thank you for your time to help . Infact I will be getting hold of one of those testers , seems like a lot less hassle than sticking probes in every which way to get readings.