XP333-r problems, need help
 

Hello

When i tried to overclock my fsb to 140Mhz the folowing is hapening to the computer.

3d graphics is not function any more, have tried to underclock the kard but nothin helps.

the networkcard starts to get wered to, i cant download fasther then 5KB/s normaly from that FTP i can download in 150KB/s.

cpu temperatur is 32 degres celcius

the cpu is handeling the speed but not the graphicscard and the networkcard

system
Iwill xp333-r, athlon XP 1800, 256MB crucial ddr, geforce2MX from hercuels.

it have to be something with the mainbord becous a have had det networkcard in my oldcomputer and there a ran a 43MHz pci speed, the agp port was overklockad to but i dont remember the speed then.
so the parts have function well befroe.

ples help my

Fredrik.L

strange problem...try taking everything out except the bare essentials..maybe you need to cool the north bridge better, or the ram isn't handling it...

du får nog träna lite på stavningen till nästa nång;) :)

Jo det är kass jag vet.
samt att jag var lite besviken att igen vill svara någon stans.
bra att du svara. så jag tänkte inte så mycket
tja kanske kan vara nordbryggan, men ok får kolla det.

english board....and just becuase ur cpu can handle the extra fsb doesnt mean the rest of ur system can...fsb overclocks everything (including ur nic and vid card) so they probably cant take the high fsb...

try running at 166:166:66:33 and see what happens

Hello
Im sorry fore uesing swedish in the forum.

I got the graphics working good now, I just hade to uppdate the bios to get it working, strange.

But the network is not workin so good.
I can host a server and thats working nicely but a cant download at all.
So mayby i have to by a new network card.

what nic do you have? 3coms are pretty FSB sensitive

lundahl
There is nothing wrong with a little chatter in your native tongue :D Don't sweat it. It can be hard to properly explain a problem (and the fix) in a foreign language.

That said, those of us who can't speak Swedish couldn't help you if you only used it, nor could others benefit from your results.


Speaking of native language....
Haddy
How ya'll beeze dowon in dem dare parts?

:p

thanks for all the respons i got.

The network card is a KTI KF230TX/2 and i have run it before in 43MHz (PCI).

Very strang,
ide's

I had the same problems with display corruption and network probs after putting the FSB up to arround 155. I think it is something to do with the XP333r not automatically setting the PCI bus dividers correctly. If you set the PCI divider from 'AUTO' to clk/6 to start with and then work back from there if all is OK.
My PCI vid card seems to bomb out only a little over 33mhz on the PCI bus, so it was a case of working out the required FSB and selecting an appropriate PCI divider to get to arround the 33 megs mark. You can actually work the required settings out, for example 160/5=32 which is near as damnit to the spec of PCI.

I am awaiting delivery of my new Geforce vid card, so hopefully I will be able to wind things up a little more again with the new card.:)