Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   Xtreme Cooling (http://forums.procooling.com/vbb/forumdisplay.php?f=78)
-   -   What temps do you get with your tec's? (http://forums.procooling.com/vbb/showthread.php?t=3293)

Wayne Harrow 05-29-2002 12:13 PM

What temps do you get with your tec's?
 
Im gettting my tec soon so im curious of what temps people are getting?

cheers

Miss_Man 05-29-2002 12:19 PM

What TEC are you getting?
For me, its 21C load temp, Athlon XP @ 2079 mhz, 2.18v, 34C water. Using two 172 watt peltiers side by side at 22V each. Measured by the onboard mobo probe.

Wayne Harrow 05-29-2002 02:16 PM

Im getting a 220w tec but im not expecting any good temps untill i add another rad.

imagex 06-02-2002 09:15 PM

Dude where are u getting a 220watt peltier from?? I want one!!

Wayne Harrow 06-03-2002 05:16 AM

I live in UK some im getting it from www.tekheads.co.uk but if your in US you can get them from www.Dangerden.com or www.cooltechnica.com.

bigben2k 06-03-2002 08:25 AM

Just out of curiosity, do you intend to pickup a heater core?

(Hello, UK!)

Wayne Harrow 06-03-2002 08:59 AM

Na im thinking of getting one of the OCPC Abyss Rads with my BIX aswell.

Anomaly2181 07-29-2002 02:39 PM

Hey Miss_MAn what power supply are you using to power your 2 172's? Also a load of 22C seems high even for an athlon with 2 high power pelts.

Wayne Harrow 07-29-2002 02:55 PM

Not realy beacuse his water temp is 34 degrees and his processor is putting out alot of heat. Also the on board temp monitors are also quite abit high specially when going under ambient.

imagex 07-29-2002 03:30 PM

I've diecided to stick with my 172 watt pelt, it's keeping my 1.4g running @1.6, core volts maxed ,@ 71F. this way its cooler than a heatsink and fan but I have no chance of condension " that condension's a real pain in the ass!";)

Wisked Klown 08-29-2002 12:25 AM

Miss_Man is putting off anywhere from 145.54watts of heat to 137.10watts of heat. The higher one is for a XP1600 and the lower is for a XP2200. After all he didn't say what XP he had.

ap0calyps 12-23-2002 01:27 PM

Quote:

Originally posted by Miss_Man
What TEC are you getting?
For me, its 21C load temp, Athlon XP @ 2079 mhz, 2.18v, 34C water. Using two 172 watt peltiers side by side at 22V each. Measured by the onboard mobo probe.

How are you cooling your water?

Miss_Man 01-08-2003 09:38 AM

I've quit PC-hobbying for some time now but if you're interested, here's how I was cooling the 2 x 172s, 1 x 65 and 1 x 80w pelts and the water.
http://bravo.ausgamers.com/lardarse/lard/36.jpg
http://bravo.ausgamers.com/lardarse/lard/final9.JPG
http://bravo.ausgamers.com/lardarse/lard/prol.jpg

I know you dont have room for that. If you're in for a detailed read about it, you can go here.
http://www.overclockers.com/tips1003/
http://www.overclockers.com/tips800/

jtroutma 01-08-2003 06:41 PM

So NOW what are you into Miss_Man? :)


All times are GMT -5. The time now is 01:21 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...