Tygon + Usplastics = ownage...
 

First, let me say I ordered my tubing on the 11th, in the evening, and I ordered 2 day shipping. It arrived this morning, the 13th.

Not only that, but 2nd day UPS shipping from USplastics is the same price as DangerDen's 3day UPS select (which isn't gaurenteed to get there in 3 days....)

But I replaced my shitty Vinyl tubing with R-3603 1/8" wall tubing. It's awsome. Completly worth the money I spent for it. My Vinyl tubing was leaking with hose clamps, and this Tygon didn't leak a drop, even before I put the clamps on. Not only that, but the bend radius is awsome.

Definatly, if you wanna do watercooling, go with Tygon, I didn't really think tubing was that big of a deal, but it's a BIG improvement in my system.

clear like vinyl, flexible like silicone, not to mention its chemical resistant.

i think it was worth it.....i just wish i wouldve known about it befor i got my silicone lol.

Tygon fan here to...i need to take some ne pics of my putter since i added a GPU block...i have a nice 1 1/2 bend rad going from Gcard to my pump man it looks sweet

Oh, btw... anyone else notice the warning in the package that said:

I found that quite interesting....:shrug:

the state of california finds that anything in great excess causes cancer lol. i wouldnt be worried about it....

which tygon do you get?
they have 10 different categories of it

damn its all soooo cheap too!!!

lab grade 1/2 id x 3/4 od R-3603

Clear Tubing For Chemcials 1/2" I.D. 3/4" O.D. and 1/8" wall
Formulation R-3603. Standard length is 50 ft. Sold in 10 ft. intervals only.

That is what I got.

The tubing is on this page. Get the 1/8" wall, which is the thickest

Unless you're using tygon as a straw, snack, or rubbing it all over yourself. Don't sweat the cancer warning.

if u dont need 10' of it u can buy it by the foot here

http://www.mcmaster.com/catalog/108/html/0083.html

they give me good service to

I hope you understand that if you put quantity "1" in there you will get ONE foot of tubing. I just called them to verify because it seemed why too cheap.
REMEMBER ALL PRICES FOR THE TYGON 3603 IS BY THE FOOT.

or you could just buy the stuff from DDen.......

yea, but they still beat all the watercooling sites prices by a longshot

DDen sells the 3603 1/2" ID 3/4" OD tygon tubing for 2.90 / foot (1 cent less than USplastic). also, it seems USplastic charges like $10 or something to ship it....
and McMaster charges even more per foot.....

No... It was cheaper for ME to get 2 day shipping from USplastics than it was for me to get 3 day shipping from DDen.

USplastics assures that the product will be shipped SAME DAY if orders are processed before 5:00pm EST

DDen says "Allow 3-5 Days for processing". Which duh, they run a small outfit. To me, it made more sence to save on shipping charges, and get it to me alot faster.

Can I buy Tygon in Europe?

got some tygon... must say very impressive


as far as the whole cancer thing.. unless you're eating or smoking the tygon.. dont worry about it.


smoking tygon.... hmm.. nah

I just ordered me up the 10' minimum from USPlastics.When I first started to post on these forums it was about tygon and how it said urathane on the tubing but I think I was ripped off by the company I bought it from because it's not tygon. I've seen the real tygon since then and I can say it's some of the softest most flexable tubing a person can use. I can't wait to get mine:D

OD = Diameter of the inside?
ID = ??!
wall = thickness of wall

OD= outside diameter
ID= inside diameter