FOR SALE/WTB/WTT Waterblocks
 

Just working on testing waterblocks. I make my own and like to test them against others. Tested against a maze2 already and a maze3 will be next. Whouldn't mind trying out some swiftech or gemini or whathave you.

I have for trade (this is only a samll portion of what I have Ask I may have what you are looking for):

1 DD Super cube rad
2 Black ice rad
3 Custom heater cores
4 Custom resevores with via pumps.
5 Custom water blocks


Here are some pics of the custom stuff:

http://community.webshots.com/album/35111553UecmAe

http://community.webshots.com/album/38150901opPARw

http://community.webshots.com/album/40268738Vcjeom

In here you will also notice inline temp probes and custom relay swites.


My pm or email me at bah@webmedic.net

Will you sell the Super Cube instead of trade? If so how much?

Yes I would. I'm not sure I can tell you that I paid about 70$ for it new. It was only used a few times and has been sitting since. I'm open to offers but be fair please. I know I won't get 70$ out of it but at least 40$ shipped whould be nice.

How about $45 shipped?

What size barbs are on it?

That whould be great I take paypal under auctions@webmedic.net. It has 1/2 barbs.

Ok. I have a problem here. I will be buying it no matter what. But I need it by Wednesday and but I can't get you the money until Saturday or Sunday. So if you will take my word will you send it Saturday no matter what to make sure it gets to me ASAP? I promise and guarantee I will send the money.

Sorry I just saw your post but I can ship it monday like two day. email me your addy and I'll make sure it gets to ya. bah@webmedic.net

Did you get any of my emails cause I sent 3. Anyway I will email you again but dont worry about sending it right away. I am leaving today until Tuesday and I have just ran out of time to do a lot of stuff. One of which is to get the money in the account. So, I will pay you when I get back and you can just send it then. I will email ya with the address though. Tell me if you get the email.

How much for the res? and how many GPH is the pump in it?

The res are 35$ For the 130gph version and 55$ for the 370gph version.

Tey both give the same temps in my system but it is optimized for max flow.

i think you may have a deal on your hands for at least one of them,. would you make me a package deal on both shipped? what are the fittings size and do they come ready to plug into a PSU?? i couldnt really see the relays or anything

They are not of the dc variety. Search these forums for info about dc and you will see that the only ones that work well enough to be used are 100$ and up.

I can and do make relays also. But the resevores come ready to plug into any american 110 volt ac outlet.

The fittings are 5/8 inch for increased flow and work perfectly with silicone or tygon 1/2 inch tubing as that is what I'm using in the pics. Sure I could do a packaged deal email me at bah@webmedc.net.

ok email sent. :D

Hi webmedic
I was looking to build a res. for my upcoming W/C project . It was to be a simple clear plastic tube with 1/2" inlet/outlet with a fill at top with screw cap. Of course the materials are readily available but with the quanties you have to purchase it becomes not so cost effective.I thought after seeing your W/B goodness that you might consider fabricating a res. for me .If so I could send you the required specs I have in mind of course working with you on the available materials your end.UP FRONT I don`t do Paypal and would not entertain Checks in the mail :D .If you indeed would agree to take on this project and after review of details etc. could shoot me a price ,then i would send you funds via Snail Mail.Thanks for your time .

Sure we are working on a res design right now for the inline folks anyway and custom fab is not s o much different. our inline res should be 25$. It depends on the size and amount of materials used but I don't think the price would be to much different.

Just let me know the dimensions and we should be able to get on it.

Hallis we need to order some parts for the relays. The ones you saw are not a finished product just used for demo purposes. It's funny though we have had so many requests for these little things. Anyway I need to get some resin make make an actual mold and make it profesional. If you would like a few as they are let me know. They will work but they are not, like I said, a finished product.

hey web medic can you come up wioth a price for combo of

370 gph pump and res/rad with the black square shroud
no black ice stuff, Im a heater core guy



also what size fan is that shroud set for (i need 120mm)and some approximate dimensions would be great.

Do you want the pump to be in the res or do you want the res as a seperate part.

The fan shroud can be set for 120mm or 6inch fans. I guess we could make whatever size hole in it you wanted but I wouldn't use antything smaller that 120mm.

in the res i like that al in one setup idea.


mines al seperate and its a pain and extra tubing

I can wait for the finished product. :-)

Ok the res with the 370gph is 45$ and 52.50 for the clear version. The fan shroud is 45$for the shroud with a radator. Without the rad it's 22$. We are also working on clear version of this but it's not finished yet.

Ok I'll get to work on it but this is fair warning. I'm going on vacation to yelowstone this week (it's the firsttime in 3 or 4 years) I not ignoring anyone if I don't get back right away. I'll be back next monday.

webmedic throw a post when you get back, I need to place an order

I'm back.

ok first of a couple of questions?

does the shroud and rad come with the fan or do i need to get one?


can i get a package dea if i buy 3 rad and shroufd and 3 res and pumps

if so what kinda deal wiuld you give me